Supports LSB, USB, CWL, CWU, keyer, RIT, SPLIT, etc. plus various
performance improvements.
However no rotary encoder.
73 Allard PE1NWL
toggle quoted message
Show quoted text
On Mon, January 29, 2018 01:55, KC9SGV wrote:
Look for the Bitx40 Amunters sketch on github.com
Does LSB, USB , CW.
Needs some hardware wiring, but not much.
KC9SGV
Sent from my iPad
On Jan 28, 2018, at 3:57 PM, Fred WA0GMH <flderoos47@...> wrote:
I just finished mounting my Bitx40 in a box and wiring the controls. It
works great and is much more sensitive than I expected. I still have to
wire up a microphone and see how it transmits. My plan is to replace
the band pass filter and low pass filter so that I can use the radio on
630 M to operate JT-9. It would be nice to use an encoder, rather than
the pot for tuning and I also need to switch from LSB to USB. I have a
little experience with programming the Arduino, but just a little! So,
is there a version of the firmware that includes using an encoder for
tuning and allows switching between LSB and USB? From what I've seen,
the firmware is pretty well commented, so I'm hoping that finding where
to set the BFO frequency and set the range of the VFO frequency will be
obvious.
Fred WA0GMH
Allard PE1NWL