Look for the Bitx40 Amunters sketch on
Does LSB, USB , CW.
Needs some hardware wiring, but not much.
KC9SGV
Sent from my iPad
toggle quoted message
Show quoted text
On Jan 28, 2018, at 3:57 PM, Fred WA0GMH <
flderoos47@...> wrote:
I just finished mounting my Bitx40 in a box and wiring the controls.? It works great and is much more sensitive than I expected.? I still have to wire up a microphone and see how it transmits.? My plan is to replace the band pass filter and low pass filter so that I can use the radio on 630 M to operate JT-9.? It would be nice to use an encoder, rather than the pot for tuning and I also need to switch from LSB to USB.? I have a little experience with programming the Arduino, but just a little!? So, is there a version of the firmware that includes using an encoder for tuning and allows switching between LSB and USB?? From what I've seen, the firmware is pretty well commented, so I'm hoping that finding where to set the BFO frequency and set the range of the VFO frequency will be obvious.
Fred WA0GMH
