开云体育

I posted a picture with the dimensions and a 3d picture on the next message.? You should be able to read the dimensions from the drawing?? Make them about 1/8" thick with the rear 1/16" cut back an 1/8" to make it slide into the slot.? Put 1/4" radius on 4 corners.

I printed both front an rear panels on Blue tape with ABS.? They have a fairly nice flat (matted) black look.? They fit nicely.

73's

Mike

/g/BITX20/message/39732

and the next message for a look.

I found the following on mine:

Outer 1.35

Inner 2.25

Groove on shell 2.45

-- 
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID  "MotDog@..."
Mike@...