Re: Problems with Arduino Nano: has anyone the program for BiTX 40?
|
For what it's worth..I have down loaded my DDS pictures with the Nano removed.? I installed headers so I can Plug n' Play nano's as improvements come in.? Just remember the USB connection on the NANO points off the DDS as always (after you solder in the headers). Hope this helps along with the other BITX Group help/ suggestions. The extended LCD display is something I'm trying out. You should be able to zoom these pictures
73 Larry WA9DOH
On Fri, Aug 18, 2017 at 3:11 PM, Jerry Gaffke via Groups.Io <jgaffke@...> wrote: It is possible that the mistake only zapped the program inside the Nano
without destroying the Nano.
I would first try programming the Nano using the instructions found here:
? ??/g/BITX20/message/31491
I do recommend you download Allard's code as mentioned above.
It should work just fine without any hardware mods to the radio,
and fixes a number of issues that were in the original code shipped with the radio.
If curious, here is that original code that shipped with the radio: ?
It requires the use of an old etherkit Si5351 library, not compatible with the current library.
On Fri, Aug 18, 2017 at 01:01 pm, Jerry Gaffke wrote:
Perhaps I am wrong and someone will have a suggestion for an easy fix.
But I think your easiest solution is to buy a new Raduino from HFSigs.
|
