I ran the SCAD file through OpenSCAD. Will there be a lid for that enclosure eventually?
Rich
KC8MWG
On Thursday, March 9, 2017 4:26 PM, Allard PE1NWL <pe1nwl@...> wrote:
I'm not completely sure, but I believe this is the one, or at least very
similar:
they're quite cheap so why not give it a try.
73, Allard PE1NWL
On Thu, March 9, 2017 19:27, bjorn wrote:
> Got the box printed and installed the BOTX40 and worked without any
> problem. (see enclosed? pic)
>
> Managed to loose the small electret microphone though.
>
> Anyone knows where I can buy one?
>
> Bjorn
>
>
> On 2017-03-04 22:38, Bjorn Pehrson wrote:
>>
>> I am in the process of 3D-printing a box for the BITX40. If anyone is
>> interested, my openscad file is available at
>> The final validation remains
>> though, so no guarantees yet...
>>
>>
>> On 2017-03-04 22:09, Andrew Kasurak wrote:
>>>
>>> I've got the bitx40v3 infront of me right now. It is 127.12 (side
>>> with bitx40v3 label in copper, with P3 and P2, parallel the side with
>>> the heatsink) by 114.43, although the heatsink overhangs an
>>> additional 5mm? (using my canadian tire scale..). Holes are 3mm.
>>>
>>>
>>> I don't have the raduino.
>>>
>>>
>>
>
>
