开云体育

You can also reduce the attenuation of the audio to the loopback. Change
in sbitx_sound.c:

#define LOOPBACK_LEVEL_DIVISOR 8

to something like 4 or 2.

- Rafael

On 7/6/23 18:50, Joe wrote:
> Dave,
>
> The audio problems with WSJT-X most times seem to pop out of no where
>
> Until a few days ago, it ran very well.
> Then a day later the rx audio disappeared.
> One time it was me , having clicked sbit twice.
> The others, unknown was the cause was.
> The solution for me is Shutdown.
> Run sbitx app then check output capture.
> Put it max..
> Then I run WSJT-X and audio usually fine.
> Sometimes it appears lower on the scale but still ok.
> I then usually check the output capture level and many times it's only
> half way.
> So I crank it up while watching the rx audio
> Level, and watch it go up as I move it up.
>
> The odd times settings look ok but still no audio.
>
> If so I do a clean reboot.
> and check it again..
>
> I usually close fildigi before loading WSJT-X. I have not seen where
> it made a difference but, less load on system.
>
> Still a mystery why?
> Will keep plugging at it until I find a cure or a method to fix it ...
> I believe it's audio sharing, or some software issue, since the audio
> works perfect with the? sbitx app.
>
> It's to bad sbitx does not have a a mode which allows other apps to
> use its audio directly if user has selected digital mode.
> Or gives the app priority
> I presume it's currently doing a virtual share ??
>
>
>
> Joe Basque
> VE1BWV
>
> On Thu, Jul 6, 2023, 11:22 AM Dave, N1AI <n1ai@...> wrote:
>
>? ? ?Strange, I checked all these settings, and they were all the
>? ? ?defaults already except for the Capture level so there was nothing
>? ? ?to change but that, unless I missed something.
>
>? ? ?The end result was rig control worked (wsjtx can change
>? ? ?bands/modes) but I didn't see anything on the wsjtx waterfall.
>
>? ? ?I just double-checked.
>
>? ? ?So, is there a step missing in the above instructions?
>
>? ? ?Thanks!
>
>? ? ?Dave, N1AI
>
>