开云体育

Hello,

I dont own the SBITX, but have had software and audio problems with wsjtx many times. sometimes the audio drops out, or give a screen lockup issue,or it puts my ports where the mic is accessible by whistling but not thru my radios. I usually have to reboot with wsjtx.

My problem solver? JTDX. it loads, it runs and it works.Ive had the problems described with wsjx with windows,linux and MAC.

course i dont run Windows anymore its been years, but the linux and MAC versions i have had similar issues.

Sometimes after installing wsjtx will come up with a warning window saying sound device not detected, . Sometimes i get "lost Audio" situation. Ive configured, ive eleted and reloaded, etc. thats why i dont do wstjx. i believe its really buggy with my equipment and computers.I have lenovo t430 thinkpad running ubuntu with 250mb harddrive and 8gigs of ram even.

?I can run SDRTRUNK, Airspy software, and some Powersoftware from ke9ns. it all works, most other digital software works on my laptop too.I believe its the wsjtx software on the PI. I had problems with wsjtx with my 4gb ram PI loading and running. deleted it and installed dragon OS raspberry PI version on the SD Card.Dragon OS has a boatload of Ham software preloaded.

dont know if this will help,

73

David

ac9xh

On Thursday, July 6, 2023 at 01:51:07 PM EDT, Joe <joeman2116@...> wrote:

Dave,

The audio problems with WSJT-X most times seem to pop out of no where

Until a few days ago, it ran very well.

Then a day later the rx audio disappeared.

One time it was me , having clicked sbit twice.

The others, unknown was the cause was.

The solution for me is Shutdown.

Run sbitx app then check output capture.

Put it max..

Then I run WSJT-X and audio usually fine.

Sometimes it appears lower on the scale but still ok.

I then usually check the output capture level and many times it's only half way.

So I crank it up while watching the rx audio?

Level, and watch it go up as I move it up.

The odd times settings look ok but still no audio.

If so I do a clean reboot.

and check it again..

I usually close fildigi before loading WSJT-X.? I have not seen where it made a difference but, less load on system.

Still a mystery why?

Will keep plugging at it until I find a cure or a method to fix it ...

I believe it's audio sharing, or some software issue, since the audio works perfect with the? sbitx app.

It's to bad sbitx does not have a a mode which allows other apps to use its audio directly if user has selected digital mode.?

Or gives the app priority

I presume it's currently doing a virtual share ??

Joe Basque?

VE1BWV?

On Thu, Jul 6, 2023, 11:22 AM Dave, N1AI <n1ai@...> wrote:

Strange, I checked all these settings, and they were all the defaults already except for the Capture level so there was nothing to change but that, unless I missed something.

The end result was rig control worked (wsjtx can change bands/modes) but I didn't see anything on the wsjtx waterfall.

I just double-checked.

So, is there a step missing in the above instructions?

Thanks!

Dave, N1AI

?