开云体育

Buonasera, ho assemblato anche io un atu1000, e non ho il firmware 3.2 lcd, l unico che funziona correttamente è la versione 2.7 riportata sopra, chiedo aiuto a qualcuno piu esperto di me in merito,

Hi Kevin Jo may be right.? Read the pic (program and eeprom) and then see what the config bits say.

OK I've found a solution, using X IDE, see attached for details. Hope this might help others struggling to use the PICKit4. Kevin - M0KHZ

You might be able to do that with a TL866 It doesn't work with all chips. Which one is it? Jim ? G4EQX

Hi Jo I'm sure my config bits are set correctly, see attached... What every I try to do the eeProm data is not being changed, I'm probably doing something really stupid but X IDE and PicKit4 is all

Hi Kevin Isn't the eeprom write protected? This means you will have to clear the PIC and data first and then re-program it with the protection bit unset. 73 de Jo PG4I

Update This method doesn't work after all.... Still working on this issue ..... Kevin - M0KHZ

Hi All So I now have PicKit4 editing the eeprom data, I had to change the project configuration to disable re-writing of the eeprom data, see attached screen print. So the full sequence is as follows:

I’m currently building the 7x7 PIC16F1938 version. I am using a PicKit4 for programming, and have no problems programming the latest firmware. However I can’t edit the EEPROM contents. Within X

I guess the Ukraine boat has sailed for me and others, oh well, snooze, you lose... Just have to rely on the ol' AT-1000 Pro II. My intent was to put the ATU-1000 at the base of my 43ft vert. John

Thank you, Dennis, you just saved me some cash, I've been hesitant to pull the trigger on this thing, now I won't. Thanks again, John VE7KKQ [email protected]> wrote:

Ah yes, John...sorry! So very dense of me to not figure that out! If one scrolls way far down...the assembled version is down there. A word to anybody buying the Chinese tuner: the powdered iron

The "CANADIAN" refers to the price, so in American $, that would be about a bit more than 30% less. The link also gives you the choice between the KIT and ASSEMBLED, if you were to read all that is

Your link shows a Chinese KIT, not Canadian fully assembled. $231.41 Plus 10 bux shipping, CANADIAN, already assembled, no guesswork or instruction searches required.

$231.41 Plus 10 bux shipping, CANADIAN, already assembled, no guesswork or instruction searches required. https://www.aliexpress.com/item/1005003304104480.html?spm=a2g0o.cart.0.0.44603c00tqnfcl&mp=1

Looks like a great deal if you figure it lot. Google LDG tuner schematics and manuals and the ATU-100. Might help

Jo: If you look at the EBAY listing you will see that the seller is no longer in operation until next year. He is in Russia and their Post is unreliable around the world because of the crisis in

Good morning, I have received the 1 kW tuner a few days ago, sold by seller a_rd3qq. Here is the link: https://www.ebay.nl/itm/254712390972?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649

Thanks! I think it was my SO-239 connector which was bad. I swapped it out and everything works as it should, 73, Sam

I just finished one myself. I would look carefully for solder bridges and bad contact with enameled wires. I have had them look good and still be bad. I know it’s obvious but it has happened to me a