Re: ATU 10, Display losing pixels when tuning?
|
Oops, we speak different languages. Yr picture showing you are using ATU100, while I am referring my ATU10. May be the email thread is somehow modified. Yr mod may not be applicable to ATU10.?
Anyway, tks for quick response. 73
de VR2XLQ
On Mon, May 15, 2023, 8:54 PM Fabrizio Furano < ffurano@...> wrote:
Instead about the filter capacitors on the butttons,
here is the blog where I got the idea. I can confirm that it
works,
and the automatic tuning becomes more stable by adding those two
caps.
f
Il 15/05/2023 14:48, Fabrizio Furano
via ha scritto:
Oh, I wish, but it's on the mast :-P I use it only remotely
The mod is really simple, clip the ferrite on the lcd cables...
keep them
away from the toroids... voila
f
Il 15/05/2023 14:24, VR2XLQ via
ha scritto:
Hi Fabrizio, (resend to correct typo)
Can you take some photos to illustrate your
resolution method. I am interested to try on my ATU10 as
well, since I got the same issue.
73
de VR2XLQ
Hi Fabrizio,
Give you take some photos to
illustrate your reslolution method. I am interested
to try on my ATU10 as well, since I got the issue.
73
de VR2XLQ
On Mon, May 15,
2023, 8:04 PM Fabrizio Furano < ffurano@...>
wrote:
Hi,
?I had the same issue on mine. It was
solved by making sure that the wires
connecting the LCD pass as far as possible
from the PCB with the toroids,
and putting a ferrite bead clip around them.
?Another mini-mod that I warmly suggest
(this time against the tuner to go mad
during TX in automatic mode) is to put two
.1uF ceramic capacitors in parallel
with the buttons, VERY close to the chip.
?
Fabrizio, F4VUK
Il 28/04/2023 14:05, Clint via ha
scritto:
I have an ATU-10 bought from Banggood.
All seems good with the construction and
function except it appears that when
tuning RF is messing with the display and
turning pixels on / off that shouldn¡¯t be.
This happens during tuning and with both
versions 1.5 and 1.6 of firmware.? Anyone
else seen this happen or fixed this
problem?? As I said the tuner works fine
and cycling the power resets the display.
It is annoying that the display gets hard
to read after a few tunes.?
73, Clint
|
