开云体育

I searched some of my logs and find that you DID gate some packets to the APRS-IS, but you are running your APRSIS32 instance as KQ4LMY which is the same as your radio.? For debugging issues, and

Well, the log file attachments didn't get here. Also, it is always good to provide full details of your configuration.? I can see that KQ4LMY is likely your FTM-500 and KQ4LMY is also "aprs.fi via

New to aprs and trying to setup my FTM-500 in my house as an I-gate With aprisce32. I can't seem to get RF received on my station to forward to APRS-IS, at least, I can't see any traffic showing up in

Thanks Lynn, I'll have a look at them and see what I can find. -- 73 de Demetre - SV1UY

Do you perchance have Enables / Ports / Log All checked?? And if so, you should have some *.PKT files that hopefully contain all packets received by your station.? That should have all the details

Hi Lyn, My APRSIS32 is only on RF not on APRSIS. Have a look at the attachment please. Could it be that someone is Gating from APRS-IS to RF or mangling the PACKETS and confuses APRSIS32? Or maybe

The first one (RF-Path) was a packet copied over an RF channel, probably the one you named TM-D700 based on the upper left corner.?? According to the expanded me u path that you so graciously

Hi, Does anyone know the difference between RF-PATH and IS(WIDE)??? Please see attached pictures. -- 73 de Demetre - SV1UY

Right now I'm working in offline mode just to experiment with the map and such and don't want to flood the frequency with packets. Also, I was a bit surprised when I was working as an IGate a few

May I ask what you're running that you think only needs to beacon once every 3 hours??? Seems extreme to me.?? With that setting, you might as well just never beacon at all? Certainly, without

I see that when setting the min and max time in smart beaconing that it only allows for up to 300 seconds min, and 60 min max, so the 3 hour setting I had gets wiped out even after I accept putting it

Thanks, I'll have a look. Not being on the 390 it should be pretty quiet except for the ht that I'm running with it.

Yes, I've tried with and without the box checked.

Sounds like you have Smart Beaconing enabled and have a drifting GPS.?? Try going to Configure / GeniusBeaconing and check the Time Only box.? Then set the Max Time to the interval that you want it

Is your smart beconing set to Time Only? [email protected]> wrote:

Good morning! I've been trying to figure out how to make it so it doesn't beacon so often. I went to configure and smart beaconing and set the times roughly to every 3 hours, but I see it's still

Interesting! I am always looking for something possibly better. I will do some research and get back with you. Matthew KK4ZDZ

Thank You! I will have a look. Matthew KK4ZDZ

Any Windows-based auto-restart of the program will likely bring the program up in the same state it comes up when you manually start it. What "suspended TX" are you referring to? Lynn (D) - KJ4ERJ -

Probably not for this group, but you never know. I use a developer version of the prog to fill in Mold with local internet activity.? ?Just got an update installed.? ?It's working great, and I