开云体育

Everyone is using the same version?

Well, I can confirm that nothing has changed in the KISS-over-TCP nor Simply(KISS) port of APRSIS32! Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

Yes going to as well, though I would try here since I am using APRSIS32. Thank you. -- Apologies for any grammar or spelling errors! -- 73 de Glenn Allison N3MEL (tprfn) The Packet Radio Forwarding

Seem like this would be better asked in a VARA support group and not APRSIS32.?? If there is such a group? Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

There is a group of us testing VARA HF on 40m daytime and 80 nights, and although we can see each others signal in the waterfall of VARA nothing is printing for any of us. We had this working 8 or 9

I found an old WebDT366 tablet with a mechanically damaged touch screen. I ordered a new AMT9507 touch screen for it. Unfortunately, it seems to be the wrong version of the screen because the

Thank you Steve . Got the pass code. Thanks 73 Balu [email protected]> wrote:

Already sent offlist 73 Steve,? KF6WAX

I need the passcode to useAPRSIS32 Pl advice 73 Balu

Thanks 4 ?? Enviado desde mi iPhone

Funny. Thanks for providing assistance. Mike K6MFW

Your second request for a passcode was received at 11:37 today and a response was sent at 12:45pm indicating that the passcode had already been sent. But that probably doesn't matter because I also

Request was made on 10/11 2:21pm and a passcode response was sent at 3:49pm.? You may need to check your spam folder. Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

Hello group, I followed directions from the wiki site to request a passcode for APRSISCE32. I've also emailed the group owner here. Never got a reply. I wanted to setup my KPC3+ TNC at home. Is it

Hello group, ? I recently hooked up my old Kantronics KPC3+ & wanted to use APRSISCE. I went to the (http://aprsisce.wikidot.com/doc:passcode) ?& sent passcode request, but have never received a

What port type are you using in APRSIS32 for the WX3in1? Hopefully it's Simply(KISS) and the WX3in1 is locked in KISS mode? You can also bring up the Port(<YourPortName>) trace log and enable it to

Good Morning, I'm testing a WX3in1 running as an APRS I-Gate W3TAC-1 with digipeater-off. Everything appears to work on the TCPIP/internet/APRS.FI side.? My half wave antenna is only 18 inches off

Lynn, Thanks for the reply. Sorry I'm a little late responding, but I developed a high fever yesterday. Uggg:-( I will look at your suggestions and do a little more troubleshooting. Rick, you may be

?I’m not sure Starlink will allow you to pass traffic to it. I don’t think the router will allow it. I’ve had the same issues with Echolink. Rick N9NWI

Correction, that log doesn't necessarily show that packets were gated, but only that RF packets were received on an RF-looking port by an APRSIS32 instance called KQ4LMY. And in that log I see that