开云体育

Radio volume is for Rx.? The TT4 pot is for TX. The RXAMP and Volume Control do the same thing - but it is ALWAYS better to find a fixed output from the radio.? Many radios (well dual bands anyway)

On the receive level, the TinyTrak pot and the radio volume do the same thing. I generally fix one at a typical level, and then just use the other one to fine tune. Otherwise, they interact and you

Thanks so much for the detailed analysis.? Not sure what to think about the time setting.? Time on the PC seems right.? I recall I have a utillity to keep it set via atomic clock.? Not sure of the

Thanks Lynn. Appreciate the help!!

Those look correct.?? Based on the log captures and aprs.fi's raw packet view, it definitely appears that you are having intermittent RF reception (or at least, getting the packets into APRSIS32)

Here are the two screen shots requested!

My original answer, the first one in this subject thread: Check Screen / Labels / Nicknames / ME and make sure you didn't check any of the MultiTrack (New Active Always) checkboxes. Lynn (D) -

For that you're going to have to get really creative with your manually-specified filters.?? The NWS APRS information is at: https://www.aprs-is.net/WX/ And I think you're going to need to know

Not everyone uses the groups.io web-view threaded reader (or whatever you use that seems to provide a threaded view).?? If you want an answer to a question, please include it in your request. We

I've attached my APRS monitor logs for your station from both RF reports and -IS gated packet captures for the 20s of April.?? Your AB9NN-48 IS IGating some packets, but on the RF side, it is very

Can you screen capture the port settings of your RF port and your APRS-IS port??? There are checkboxes in those that affect IGate operation.?? You can also view and enable the various IGate(*)

I’m still trying to figure out my original problem. I’ve lost track since other people have asked questions about their “problems “ If anyone knows the answer to my question… the first one

what is the best way to NOT show nws flood warnings/statements but show all other NWS warnings?

If you have a thumb drive, you can test the different xml files quite easy:1. Make sure APRSIS32 is not "full screen" and close the program on each computer.2. Put the thumb drive in the desktop

The laptop is a 19 inch screen with the number being 39.0. Desktop is a 22 inch screen with number being 32.5. I am not a computer geek to mess with XML files. I may swap applications and let the

Did you get it working the way you expected? I missed the beginning post about 2 computers - was ion spam. Looking back, I see posts about pressing the right arrow to increase map detail and zoom

Thanks Robert for your response. I am not running two APRSISCE just for the sake of running them. With the desktop running correctly, I wanted to set the laptop to get the same results. I did that

Thanks so much!? I realize that APRS.FI is the place to check to see if my station is iGating.? When my station is working properly it iGates 99.99% of the APRS traffic in our rural area because of

This may be a dumb question, could you be zoomed in so far that there are no map details to see? Try zooming out just to be sure. If not, then it sounds like the software is not loading map tiles,

Burt is pretty much guaranteed to have two XML files in different directories as the instances are on two different computers. James VE6SRV [email protected]> wrote: