开云体育

Carl, The APRS packet definitions were designed to shoehorn into an existing system. They took advantage of what existed and made it do something new. It wasn't a new system designed from the ground

Kenwood and the FTM-350 and newer support auto tune to the station comment that is configured that way. -500 is down 5MHz, -060 is down 60KHz, etc.

Looking into this, it appears to be a language Kenwood radios understand.? ?My guess???? is that Yaesu radios will not?? I haven't checked if APRS.FI understands this syntax yet, but I

Genius,? Thanks, Looking at the guidance I'm a bit surpised it thinks repeater beacons should be every 10mins.? I'm scattering mine 25-45 mins (and all slightly different) mind you only a handful

Thanks 4 ?? Enviado desde mi iPhone

I think I fixed it.? I was running this on a Surface Go that I use in my vehicle.? I had it installed on a removable micro SD card rather than take up space on the internal SSD with the map tiles.?

your object comment should be 439.350MHz Toff -900CC1 DMR dvsph.net It only needs MHz after the frequency take a look here, about half way down the page http://aprs.org/localinfo.html APRSISCE

Might not help but since you run several instances, you can zip up the entire folder and drop it on another machine (then just change the callsign if necessary etc and all the other settings will be

I was asked to place a repeater as an object on the map. I did the following, but got an extra line? - the one with 'ExtraMHz' in it.? ?I didn't type that, what does it mean?

I use the D710 TNC on the FalconSat3 9600 bird. When using the Kenwood 710, you need to plug the cable into the head of the radio not the body to use the TNC in KISS mode, at least on FS3, that's what

I've been trying my best to keep APRS Foundation-related activity confined to our new group on 开云体育 (/g/aprsfoundation); occasionally, we encounter information and news important

Gil, as best as I can tell this is the view menu section of my xml

Gil, As long as the window isn't maximized, you are correct that it is supposed to save the current settings upon exit. Do you have it "docked" in a corner or half screen on close? This may interupt

I am still struggling to process the fact that Lynn is no longer with us.? I had the distinct pleasure of meeting Lynn (and Paul) several times when we worked bike ride events near Orlando over quite

Here's the wiki page for multi-line objects. http://aprsisce.wikidot.com/doc:multiline I was trying to find my example that I created, but looking at the history, that was 2011 or 2012 when I was

can anyone give me a quick run down, or point me in the direction of how to learn about drawing areas in APRSIS?

The D710 has digipeating built into the radio when the internal TNC is not in kiss mode. It's in the manual, that I don't have handy to tell you the setting to set for it to digipeater stand

That is a "third" method of connecting the D710 to a computer for packet:1. D710 internal TNC in Packet12 mode??? Old TNC3 style packet interface at 1200 baud - TNC controls TX2. D710 internal TNC

Thank you all.? I will repost when it is finalized. I didn't clarify, but this is not specific to APRS-IS32; many of the users I am trying to reach would be using phone apps.? I just felt there was

Thank you Rob. Yes, I am using the D710's built in TNC in Packet12 mode. I'm going to try with a KISS port and a DigiRig instead. Thanks for your advice. Facundo-KK4ODA