开云体育

Gil, As long as the window isn't maximized, you are correct that it is supposed to save the current settings upon exit. Do you have it "docked" in a corner or half screen on close? This may interupt

I am still struggling to process the fact that Lynn is no longer with us.? I had the distinct pleasure of meeting Lynn (and Paul) several times when we worked bike ride events near Orlando over quite

Here's the wiki page for multi-line objects. http://aprsisce.wikidot.com/doc:multiline I was trying to find my example that I created, but looking at the history, that was 2011 or 2012 when I was

can anyone give me a quick run down, or point me in the direction of how to learn about drawing areas in APRSIS?

The D710 has digipeating built into the radio when the internal TNC is not in kiss mode. It's in the manual, that I don't have handy to tell you the setting to set for it to digipeater stand

That is a "third" method of connecting the D710 to a computer for packet:1. D710 internal TNC in Packet12 mode??? Old TNC3 style packet interface at 1200 baud - TNC controls TX2. D710 internal TNC

Thank you all.? I will repost when it is finalized. I didn't clarify, but this is not specific to APRS-IS32; many of the users I am trying to reach would be using phone apps.? I just felt there was

Thank you Rob. Yes, I am using the D710's built in TNC in Packet12 mode. I'm going to try with a KISS port and a DigiRig instead. Thanks for your advice. Facundo-KK4ODA

Are you trying to get the D710 to DIGIpeat, or are you trying to get APRSIS32 to DIGIpeat using the D710 as an RF port?The difference is in which device is reading, decoding, and retransmitting the

Please let me know if you are in the Orlando-Palm Bay area and would like some APRS equipment. I will give priority to new

Hi All, I am trying to get my Kenwood D710 to Digipeat. When looking at the D710 port log, I get the following: WinMain:2025-01-12T18:11:34.370 DigiPeating Not Supported on KWD710(Pkt) Protocol

Joe, I would be thankful if you would not mind sharing the final version of the document. I also want to do some APRS training with my ARES group

You could put objects up and using 32 objects can also be areas. So say you have a large part of the area under evac or do not enter, you can make the object on the screen and path it out then convert

consider use of bulletins Also, not just about messaging, but objects of interest. - Warming shelters - First aid - Communications locations - blocked roadways - etc, the list is endless, but it is

Good afternoon. You may have seen the posts from Glen, KB0RPJ. Our ARES group was exercising APRS group messaging during our Blizzard Warning.? I am working on an instructional document for APRS

I'm not aware of a way to be able to transmit objects without also having your main station beacon as well. Might I suggest a laptop symbol, and an appropriate location, with ambiguity of course, for

Is there a way to just beacon objects & not your callsign? I am currently just using the app on my pc. No radio hooked up. I mainly wanted to beacon an object to the maps. The repeater here & some

Sorry guys, it is back up for good now. The APRSF (APRS foundation) would like to adopt the server, and I will get to it, but right now, I have a long priority list that I am working down until I

Looks like the dev server is back up. It asked me to update one of my instances. Downloaded and running now. KB3KBR Greg. Sent from my Samsung Galaxy smartphone.

ok i have made some progress, i can get the group messages. however it won't get messages from APRSDROID sent to the group. hopefully i can fix that issue