开云体育

The DIY fixes for the bubbles are tricky and not guaranteed to work.? The problem is caused by a bad batch of glue used by the factory.? That means you have deteriorated glue in there that may make

Yes, the roof panels are delaminating and there are bubbles on the outside surface.? I've attached pictures. Is there an easy fix for this?? The gist of it is that we'd like to sell the camper and

Are the roof panels the ones that are delaminating?? Bubbles on the outside surface? Take some pictures of the problem areas and post them so we can give better recomendations.

Hello, I am new to the group and I am writing with questions about repairing leakage issues in our 2007 Chalet Folding Alpine. We (my husband and I) have the following challeges with it that are

Something a digitally aware friend discovered recently: he checked flight prices from a relative's home in southern California, and got a price. When he checked again, it was from a spot in Mexico.

I came across a YouTube video that tested the output of a bunch of folding solar panels.? The Allpowers one did test out lower than most of the others.? The best performing panel was Bluetti.? The

If you look at both those panels there are coupons , you click and their prices are adjusted at checkout . Djd has $30 coupon, the all power has $40 coupon. But yeah it's good to research especially

First off, I'd like to say I've found this thread interesting because you've shown me many new lightweight panels that are available now that weren't around 4 years ago when I last looked.? I

If you want to pay $$300 - 400 for a solar panel based on name thats ok.? But the point is not the individual panel it's that there are a lot of choices at approximately $1 watt - that are still

That Panana folding panel is made from PET, not ETFE.? PET is not as good as ETFE. The first lightweight plastic panels were made from PET, and the plastic could crack, and didn't dissipate heat as

There's lots of panels at this price point , those were just 2 examples. Here is a couple more? Bifacial are good panels too, 200 watt portable $129 with an additional 5% off Panana 200W Foldable

That FJD folding panel is a terrific deal at the $189 price it lists at now.? It's a lightweight plastic panel, built with the ETFE material, which is the good stuff. It also has 4 pieces, so it

Yahoo Mail: Search, Organize, Conquer On Tue, Sep 3, 2024 at 8:23 PM, Steve T<srtimm@...> wrote: The price points quoted might be a bit optimistic.? Just looking around I couldn't

The price points quoted might be a bit optimistic.? Just looking around I couldn't see stuff quite as cheap as mentioned, unless you bought from somewhere like Temu, and I won't do that. You need

I like the idea of a power station, but weight *is* an issue, and I need a battery for breakaway switch, electric brake controller, & the rest of the 7-pin functions. (I'd also love to move the

A couple of thoughts. You don't have to change the whole converter you can just disable the dc power supply (disconnect the AC that feeds it, by disconnecting the wire from the AC breaker) and add a

Negative bus bar it is! I know it needs to be sized to match the max expected load - is that the nominal 30A of the converter, or is it the sum of max amps for all things powering from the

My 2020 Ranger 12 came with 11 stranded wires crammed into a single wire nut. I replaced that with a bus bar. The stranded wires must be tinned with solder to work reliably with a screw terminal bus

You have to install the bus bar where the converter is, which is also where all the wires are too. It wouldn't make sense to splice extensions on all your wires to have the bus bar anywhere else. I