开云体育

It was rather expensive for a tool you'd only use once in your life. Maybe setting up such a program again would be a good idea, with a hefty deposit to borrow the tool. Mike

I’ve had his site bookmarked for ages…his stuff is very good! -- Bruce Johnson "Wherever you go, there you are." B. Banzai, PhD

https://mikesworkshop.weebly.com/headstock-indexing-unit.html The author has a website and the indexer is described on this page. He has many other interesting things too. Jonas

You’ve missed the (short) point being made. Again. Tony Sent: Tuesday, 26 November 2024 4:28 AM To: [email protected] Subject: Re: [7x12MiniLathe] Three Jaw Chuck / Spindle Bore

It had a shortened shank & (IIRC) a #2 Morse taper end to let it fit snugly in the TS. Cleaning it & removing the excess shipping labels from the package took longer than the actual reaming. Previous

??? They have some pretty darn awesome vintage dirt & street bike mags too

I got this mail today & heres a list of their hobby mags that are part of their blackFriday Magazine sale , some of ya may be

If you want to have a peek at the article before you invest in the magazine, your public library just _might_ have access to this magazine. Our public library here in Winnipeg enables cardholders to

I had turret lathes and screw machines. Everthing was short. Most drill bit are screw machine length even upto 2?" size. Reamers I buy long because it lower cost can cut the shank down. Dave

I’m pretty sure you can figure out why “short shank” would be useful. Tony Sent: Monday, 25 November 2024 3:09 PM To: [email protected] Subject: Re: [7x12MiniLathe] Three Jaw

??? Ya didn't have to buy one , they were loaners & aparently some folks didn't return them . Imagine that animal

What was so special about the reamer? Dave

Opening the spindle bore is easy. LMS used to loan short shank reamers for that, until they didn't return. Doing it with a boring bar or adjustable reamer? is just a bit more tedious. (Did mine

Thanks for the heads up. I sent away for that issue. Tom

That is a good magazine.? I will look up the indexer article.?? Several Briitish magazines are superior to USA perioicals - especially air gun magazines. Thanks! -- Lone Tree, Colorado? ?USA

Catching up on my electronic subscriptions the Oct 2024 issue of Model Engineers Workshop has a pretty interesting diy indexer for the mini lathe . This is a English Magazine , but it's available at

I agree you put a bigger hole. I have not had to bigger hole but I look at the scroll bearing size the hole needs to smaller that bearing. I typically buy chuck with hole size? I want. Dave

John, I see no reason why the three jaw chuck bore could not be bored out to a larger size, in fact I would want to increase the bore size to as accommodate larger material if space allows. Dick

Now have more time the mini lathe. Working on few ideas for projects to do . Maybe make on the mini lathe a sun clock ? for a back up. Dave

10-4 animal