开云体育

Move to southern Arizona? 8-P Seriously, maybe get some way oil? It’s more viscous might be better to prevent rust?

I may have mentioned this before, but I have a serious moisture/humidity issue here in WV.? Similar issue as further South, except we tend to have cooler temperatures, especially at night so the

You are correct, their 7x14 does have many of the parts that are on the Vevor 7x14. The part I need is one of them. For now I made a key that offset 0.032" (0.8mm) between the top and bottom halves

You buy new steel gears. Plastic is not best for a lathes. The 90T belt can be found on Amazon and Ebay. Vevor is just retailer you are on your own for replacement parts. Every part can be found on

I had the same experience with my Vevor 7x14- I was surprised that the gears hadn't cracked; it was a real struggle to get them off. I reamed all the plastic change gears so they went on securely, but

Those keyways are different between SIEG and Real Bull lathes. Check with Grizzly - their 7x14 is a Real Bull.? ?And their 7x12 is a SIEG. Parts

[Default] On Fri, 08 Mar 2024 18:22:42 -0800, "Miket_NYC" <mctaglieri@...> wrote: In a milling machine or lathe, you would simply use a smaller tool and take two or more passes. I imagine that

I should have said THIS is the list that looks like mine.

Thank you. This does look like my lathe. The part that I have the problem with is Number 17. It is like the ones LMS has but the 2 keyways in mine are 4mm and theirs have 3mm keyways. The only place I

This is the manual and parts list for the UK Warco WM180 which is from the same stable and may help. -- Colin Spencer

If I read correctly, the part numbers are different from your Vevor picture and LMS 5100 lathe /johannes Sent: laurdag 9. mars 2024 14:01 To: [email protected] Subject: Re: [7x12MiniLathe]

I would not be surprised the Vevor did just copy that page and hope the guy did not notice the difference. The manual I received with was at less last 10 page was cut off. They shipped mine with a

Oops. In my last post I had a type for the Little Machine Shop home page.? It should be?http://www.littlemachineshop.com Charles E. "Chuck" Kinzer

Hi Dave I have LMS 5100 lathe catalogue in .pdf format, want it ? /johannes Sent: laurdag 9. mars 2024 11:47 To: [email protected] Subject: Re: [7x12MiniLathe] Vevor parts If need parts try

IF it is actually a Sieg manufactured lathe (or close to it) the "Little Machine Shop" may be able to help. This is a Sieg C2 Diagram somewhere at their site.? I don't know how to find it within

Grizzly is my go-to source for mini lathe parts, although I have no complaints with LMS. Grizzly sells a 7x12 and a 7x16. Part numbers for the (presumably) common parts between them are different and

If need parts try little machine shop. I am same boat if tooling or part it is hunt surprising I can find all tooling and parts i need. Dave

That is a on going problem with parts list. This may help . I got it from someone else that got it from Vevor with lot of trouble. Dave

The Vevor 7x14 lathe I bought has no parts list and does not always match what is on other mini lathes. The quality of the parts has not always been the best. The keyway in the shaft for the "A"

Hello, Mike! Do you have access to a Deckel type tool grinder? If not you could easily make a simple jig to do this. Of course this would not be a quick solution but you would then have this jig for