In my last post I had a type for the Little Machine Shop home page.? It should be?
Charles E. "Chuck" Kinzer
On Saturday, March 9, 2024 at 10:17:39 AM PST, Charles Kinzer <ckinzer@...> wrote:
IF it is actually a Sieg manufactured lathe (or close to it) the "Little Machine Shop" may be able to help.
This is a Sieg C2 Diagram somewhere at their site.? I don't know how to find it within their site but found this link in a general search.? It is not the same as the diagram in the last post, but certainly similar.? I think they are all similar.
Little Machine Shop can probably help with references to parts on this model C2 drawing.
On the Little Machine Shop site which is here:??
You can click on "Support" and then "User's Guides" and you get a page full of machines.? The SIEG C3 lathe may the closest one to yours on the page (not sure about that).? If you click on it, you get its user's guide.? If you click on that you get its exploded view diagram AND a parts list.? Little Machine Shop can probably work from the information there.
Here is a direct link to that C3 User's guide.
I noticed a blog comment online of somebody else having a lot of trouble getting the correct Vevor manual as they received the one for the wrong sized lathe with their machine.
Charles E. "Chuck" Kinzer
On Saturday, March 9, 2024 at 09:42:40 AM PST, davesmith1800 <davesmith1@...> wrote:
That is a on going problem with parts list. This may help . I got it from someone else that got it from Vevor with lot of trouble.?
