开云体育

LOL. Been there, done that! Glad it was simple! -- Bruce Johnson The less a man knows about how sausages and laws are made, the easier it is to steal his vote and give him botulism.

As a retired I.T. Professional my goto is to usually ask that but sometimes it can come off as sarcastic or rude to ask the universal question (actually there are 2; is it plugged in and did you turn

I spent the best part of an hour pulling my “dead” laser cutter apart before realising I’d forgotten to turn the emergency switch back on. We all have brain fades occasionally. At least

That makes me feel better for my experience of thinking my lathe was dead - only to realize I had activated the emergency shut-off switch.

I wouldn't be too embarrassed.? That sort of thing happens to most everybody.? And if not, it is because they never DO anything.? And even though a simple fix, it helped to go through some steps

I want to thank everyone for their suggestions, which seemed particularly good.? I was able to print out the schematic, thanks. I started trying to measure voltage on the control board.? Nothing.?

LMS also has a good troubleshooting guide: < https://littlemachineshop.com/images/gallery/PDF/drivetroubleshooting.pdf > Having? said that, a close visual inspection is always a good first step.

Had a similar problem with my 7x11 and track it down to the connection to the carbon brush. Good luck

How far did you check power?? As in, is the control board even getting power (past the fuse, mag switch, e-switch)?? A VOM is certainly your friend here and even beyond that a scope isn't

And this site has more detailed info on the (probable) controller board, but honestly, unless you’re adept at repairing complex electronics, if it’s the board, getting a new one is the easiest

LMS has wiring diagrams; one will probably match your lathe. https://littlemachineshop.com/reference/wiringdiagrams.php?srsltid=AfmBOoomtz5VTCGGi7-i5pLeaC6KYiHvsVAkwc4sbB0ZL3nuyrhti7ln? Wiring

My 7x12 Northern Mini-lathe has suddenly quit working.? Previously, when I flipped the switch from forward to reverse I heard relays click.? Now nothing.? The fuse tested good.? I did not see any

Lots of interesting ideas.? I'm particularly interested in working with heating the PVC for future projects.?? In this case, using the PVC coupling, once it was mounted and centered it literally

No need to have a ventriloquist on this forum ! Common sense. Full stop On 28.10.24 07:06, Gerald Feldman via groups.io wrote:

Once again an e-mail string has fallen off its original subject and is wandering around aimlessly. Can we please get back to the original subject of mounting a plastic elbow on a lathe or just stop

So, for those who have no common sense and who are so scared : please don't use nor drink water, whose scientific names are also di-hydrogen monoxide and mono-oxygen di-hydride. It

HCL? Reads article… yup, HCL. Yeah, don’t heat up PVC so much where it goes past being all gooey, it releases chlorine (nasty stuff) that combines with water in the air to create hydrochloric

An anecdote? Wow ! At least READ what you post. exposure to fumes from an overheated (362 degrees C) PVC extruding machine. Fear mongering, pure and simple. [email protected]> wrote:

Not bull... we've had workers that had to be hospitalized due to heating PVC. Do what you want.? Not fear mongering.

Bull.... Overheating / burning it is a problem you want to avoid for more and bigger reasons than some fumes. Heat it by immersion in boiling water. Ventilation is also welcome, always, for many