Like others have said, if it doesn't affect the usage of the vice why bother?
Ralph
Get a junk vice from a garage sale or Goodwill for practice, to see how it will turn out for whatever method you chose. Don't practice on the item you want to keep.
For the mig, you can get Silicon Bronze wire, and use argon or CO2 gas.
Yes, it will still leave a golden area like the brazing rod, but if you haven't done brazing rod?before, that's one more new skill to master. Now that isn't a bad thing, but unless you're retired, you may not want to devote time to that. I have done both, and I feel the mig with the bronze wire was a lot faster to get good results with.
There are some color matching rods for brazing cast iron! They're not an exact color match, but, they're gray instead of brass colored. They're also trickier to use than classic bronze rods.
?<??>
Roy
|
Get a junk vice from a garage sale or Goodwill for practice, to see how it will turn out for whatever method you chose. Don't practice on the item you want to keep.
For the mig, you can get Silicon Bronze wire, and use argon or CO2 gas.
Yes, it will still leave a golden area like the brazing rod, but if you haven't done brazing rod?before, that's one more new skill to master. Now that isn't a bad thing, but unless you're retired, you may not want to devote time to that. I have done both, and I feel the mig with the bronze wire was a lot faster to get good results with.
There are some color matching rods for brazing cast iron! They're not an exact color match, but, they're gray instead of brass colored. They're also trickier to use than classic bronze rods.
?<??>
Roy
|
Re: ¡°Machinists Bedside Reader by Guy Lautard¡±
He has advertised the first edition back in print in a couple of recent issues of Home Shop Machinist, and has a link to the new printing of it at amazon?
Bill,
I honestly don¡¯t know what they are worth. (I saw some for sale on the internet and thought the prices were insane. That would lead me to think he might not be selling anything anymore. Lautard still has his website up but I don¡¯t know if he is still around. He was born in 1946 and that would place him at 78.
Dick
--? Bruce Johnson
"Wherever you go, there you are." B. Banzai, PhD
|
Re: ¡°Machinists Bedside Reader by Guy Lautard¡±
There are some on amazon also.
There's "for sale" and then there's "sold".? ? Toss out the very high priced and very low priced.? ?The average of the rest may be considered the value.? ? Keeping in mine the condition also.
--
Lone Tree, Colorado? ?USA
|
Re: ¡°Machinists Bedside Reader by Guy Lautard¡±
I just did some research on EBay and found recent sales at $125.00 for a set of three.
Dick
|
Re: ¡°Machinists Bedside Reader by Guy Lautard¡±
Bill,
I honestly don¡¯t know what they are worth. (I saw some for sale on the internet and thought the prices were insane. That would lead me to think he might not be selling anything anymore. Lautard still has his website up but I don¡¯t know if he is still around. He was born in 1946 and that would place him at 78.
Dick
|
Re: ¡°Machinists Bedside Reader by Guy Lautard¡±
What?do you want for them shipped to Colorado?? ?Bill in Boulder
On Fri, Feb 23, 2024 at 6:38?PM OldToolmaker via <old_toolmaker= [email protected]> wrote: I have all three books in the series by ¡°Guy Lautard¡± I will be listing this collection on EBay tomorrow or the next day.
Just a heads up if anyone is interested in obtaining this out of print series. Condition is like new!
Dick
|
¡°Machinists Bedside Reader by Guy Lautard¡±
I have all three books in the series by ¡°Guy Lautard¡± I will be listing this collection on EBay tomorrow or the next day.
Just a heads up if anyone is interested in obtaining this out of print series. Condition is like new!
Dick
|
There are some color matching rods for brazing cast iron! They're not an exact color match, but, they're gray instead of brass colored. They're also trickier to use than classic bronze rods.
?<??>
Roy
|
Re: Can You Use a Dial Caliper as ag Non-Digital "DRO?" (was "Re: LittleMachines DROs and dials")
Most time I do calcs when making the drawings.?
I also have chart on wall which works for most. Then calculator in the tool box and 25.4 to covert from monkey ?? marks to inch
Dave?
I purchased my first metric tap in 1976 M12 used 12,000 still have tap.
My next purchase was this year M10 x 1.0 MM LH used it one time?
toggle quoted message
Show quoted text
mike allen
12:13pm? ?
only thing I can think of is that the dials are usually larger than the digital read heads & if ya want to do metric there's some math involved
|
Re: Can You Use a Dial Caliper as ag Non-Digital "DRO?" (was "Re: LittleMachines DROs and dials")
only thing I can think of is that the dials are usually larger
than the digital read heads & if ya want to do metric there's
some math involved .
I've drilled holes in several digital calipers , some were like
cutting butter & some were like drilling rock .
animal
On 2/22/24 11:37 PM, Miket_NYC wrote:
toggle quoted message
Show quoted text
Yes, I know this can be done with digital calipers. I'm
talking about doing it with a non-electronic dial caliper. Has
anyone done it THAT way?
Mike Taglieri?
This
what did on my mill.
?Dave??
Attachments:
|
??? there's also moglice which is used with reconditioning
macihne tool beds & such .
??? animal
On 2/23/24 3:41 AM, davesmith1800
wrote:
toggle quoted message
Show quoted text
FYI?
JB Weld is about 4,700 psi
Deacon is about 8,700psi high in cost also use on machine tool bed
repair.?
In hobby work JB Weld is lot easier to use over welding and low
cost.?
The Devcon is great it can be molded in place without having to
machine the bedways and dovetails. It cheaper to use JB Weld and
may not see any different.?
Dave?
|
Re: Can You Use a Dial Caliper as a Non-Digital "DRO?" (was "Re: LittleMachines DROs and dials")
I was happy with numbers on quill.
My SB had no marks.?
My mini lathe has both inch and monkey ? marks. Happy days.
On SB I used tape on drill bit for depth.?
Dave?
|
Re: Can You Use a Dial Caliper as a Non-Digital "DRO?" (was "Re: LittleMachines DROs and dials")
I have dial indicator that has 3?" face.
But use a very large vertical boring mill and 10 feet from dial indicator.?
Works great
On tail stock I never need a that a digital or dial for drill bits but but used large drills.?
Dave?
toggle quoted message
Show quoted text
GadgetBuilder 7:03am? ?
Rather than a dial caliper I used a 2" long travel indicator as seen here:
https://gadgetbuilder.com/TailFlag.jpg
This uses a plastic flag on the tailstock and a magnetic base to hold the indicator on the tailstock. Easily removed when not needed. Large dial is easy on old eyes ;-)
|
Re: Can You Use a Dial Caliper as ag Non-Digital "DRO?" (was "Re: LittleMachines DROs and dials")
Yes you can the dial type can be adjusted to zero.? I had one on a Bridgeport mill. I work great.
I like digital type all I need to do is press zero button to set start depth.
Dave?
toggle quoted message
Show quoted text
Miket_NYC
Feb 22? ?
Yes, I know this can be done with digital calipers. I'm talking about doing it with a non-electronic dial caliper. Has anyone done it THAT way
|
Re: Can You Use a Dial Caliper as a Non-Digital "DRO?" (was "Re: LittleMachines DROs and dials")
Rather than a dial caliper I used a 2" long travel indicator as seen here:
This uses a plastic flag on the tailstock and a magnetic base to hold the indicator on the tailstock.? Easily removed when not needed.? Large dial is easy on old eyes ;-)
John
|
Re: Can You Use a Dial Caliper as ag Non-Digital "DRO?" (was "Re: LittleMachines DROs and dials")
Not a bad idea - batteries run out to fast.? ? ?But being visually impaired, I'll stick with the digital type.
I have not done so, but it's no different from using a digital caliper as the starting point.
Cut off the unwanted parts and make a mount.
--
Lone Tree, Colorado? ?USA
|
FYI?
JB Weld is about 4,700 psi
Deacon is about 8,700psi high in cost also use on machine tool bed repair.?
In hobby work JB Weld is lot easier to use over welding and low cost.?
The Devcon is great it can be molded in place without having to machine the bedways and dovetails. It cheaper to use JB Weld and may not see any different.?
Dave?
|
It would better to see for photos for right recommendation.?
If cast iron jaws or location the typical the cast is about 25,000psi.?
If steel it could go a lot high to 100,000 psi a different problem and fluxcore/mig is a good option.?
Brazing is can also be good some rods are 67,000 psi that rod I use for repairs. The down side is you can see the color of brass.?
If restoring fof some else the may want the same or very close color . If cast iron this a real pain the fine righ color of rod. The cast iron welding is very higher skill need.?
Dave?
toggle quoted message
Show quoted text
chrisser Feb 22? ?
I inherited a nice little used milling vise from my Dad. It's been sitting on a shelf for a bit waiting for me to clean it up and put it to use.
There's a couple spots where it looks like someone missed with a drill and drilled slightly into the tops of the jaws
|
Re: Can You Use a Dial Caliper as ag Non-Digital "DRO?" (was "Re: LittleMachines DROs and dials")
Yes, I know this can be done with digital calipers. I'm talking about doing it with a non-electronic dial caliper. Has anyone done it THAT way?
Mike Taglieri?
This what did on my mill.
?Dave??
Attachments:
|
OldToolmaker
davesmith1800
GadgetBuilder