Locked
Re: HOW TO KILL A TOPIC Re: [7x12MiniLathe] ANSWER TO GUIDE RULE - OT
Thank you?
I did not know?
So if does do not want read or get email from topic? just click and be happy.
?
Dave?
|
Locked
Re: HOW TO KILL A TOPIC Re: [7x12MiniLathe] ANSWER TO GUIDE RULE - OT
At the bottom of the message is a link titled “mute this topic”. Click on it and it will take you to the groups.io page where you can mute the topic.
Stan?
On Tue, Jan 28, 2025 at 4:53 PM, Pierre-Raymond Rondelle via groups.io < pierreraymondrondelle@...> wrote: The title is clear. I'm fed off this useless topic. Thank you.
|
Locked
Re: HOW TO KILL A TOPIC Re: [7x12MiniLathe] ANSWER TO GUIDE RULE - OT
We have members leaving.?
To little to talke about is basic reason.?
?
Most do not cancel they just not to come back.?
?
I am doing my part by posting on how adding tooling to my mini lathe.??
?
So what are doing???
Please post photos
?
Dave?
?
On Tue, Jan 28, 2025 at 02:53 PM, Pierre-Raymond Rondelle wrote:
The title is clear. I'm fed off this useless topic. Thank you.
_._,_._,_
|
Locked
Re: HOW TO KILL A TOPIC Re: [7x12MiniLathe] ANSWER TO GUIDE RULE - OT
What does that mean?
?
Dave?
?
On Tue, Jan 28, 2025 at 02:53 PM, Pierre-Raymond Rondelle wrote:
The title is clear. I'm fed off this useless topic. Thank you.
_._,_._,_
|
|
|
Re: ANSWER TO GUIDE RULE - OT
All that stuff is covered in the group guidelines which I get
just about every month from a bunch of the groups that I'm in
including this one .
animal
On 1/28/25 11:05 AM, David Wiseman
wrote:
toggle quoted message
Show quoted text
Exactly what is really needed. Common sense, reasonableness and
practicality, nothing more is needed.?
?
The problem with just saying only
post regarding a mini lathe is After you have and have ask
or read itea about a mini lathes.? There nothing left to
talke about.?
So group could go months or some groups
years before the next post.?
?
I saw with the Old Yahoo groups. The group just stop.?
?
The Off Topic drives the group till next on Topic.??
?
So moderator has decided the direction OT to drive or
Topic only with dead time.?
?
At time you Manufacturers
had group and moderator was only interested in things
related to product. What happened is one's the group need to answer
questions moved on. I would look at history and see this
and did not join.
I am a moderate on a lot larger group than this group
and thriving with lot Off Topic/subject.
It only few rules?
?
A few simple rules to
follow.
?
1) No political
2) No ads
3) It ok with Any one's
Wife / Girl friend?
4) It is ok for any one's
child/ grandchildren see it too.
?
It could use OT or OS in first part tile but after we
talk about it was decided it was not need. On this group
of look at my past posts I use Off subject
here.?
My latest posts is on subject?
Dave?
?
?
On Fri, Jan 24, 2025 at 02:03 PM, BuffaloJohn wrote:
Each and every member of this group got the TERMS
OF USE email on Jan1. It said, in part:
?
TERMS OF USE --
How the 7x12 Group Operates
<snip>
To help achieve those goals, the following rules
govern operation of this group:
?
* On-Topic posts only. <snip>
?
If you ignored
it, you can find it here:
?
?
--
Buffalo John
On Fri, Jan 24, 2025 at 02:03 PM, BuffaloJohn wrote:
?
TERMS OF USE -- How the 7x12 Group Operates
<snip>
To help achieve those
|
Re: ANSWER TO GUIDE RULE - OT
I think are same page?
(Common sense, reasonableness and practicality, nothing more is needed. )
This all that is need.?
?
I like have said is pass {after mini lathe setup what is next step}
?
Dave?
|
Re: ANSWER TO GUIDE RULE - OT
Exactly what is really needed. Common sense, reasonableness and practicality, nothing more is needed.?
toggle quoted message
Show quoted text
On 28 Jan 2025, at 15:43, davesmith1800 <davesmith1@...> wrote:
? The problem with just saying only post regarding a mini lathe is After you have and have ask or read itea about a mini lathes.? There nothing left to talke about.?
So group could go months or some groups years before the next post.?
?
I saw with the Old Yahoo groups. The group just stop.?
?
The Off Topic drives the group till next on Topic.??
?
So moderator has decided the direction OT to drive or Topic only with dead time.?
?
At time you Manufacturers had group and moderator was only interested in things related to product. What happened is one's the group need to answer questions moved on. I would look at history and see this and did not join.
I am a moderate on a lot larger group than this group and thriving with lot Off Topic/subject.
It only few rules?
?
A few simple rules to follow.
?
1) No political
2) No ads
3) It ok with Any one's Wife / Girl friend?
4) It is ok for any one's child/ grandchildren see it too.
?
It could use OT or OS in first part tile but after we talk about it was decided it was not need. On this group of look at my past posts I use Off subject here.?
My latest posts is on subject?
Dave?
?
?
On Fri, Jan 24, 2025 at 02:03 PM, BuffaloJohn wrote:
Each and every member of this group got the TERMS OF USE email on Jan1. It said, in part:
?
TERMS OF USE -- How the 7x12 Group Operates
<snip>
To help achieve those goals, the following rules govern operation of this group:
?
* On-Topic posts only. <snip>
?
If you ignored it, you can find it here:
?
?
--
Buffalo John
On Fri, Jan 24, 2025 at 02:03 PM, BuffaloJohn wrote:
?
TERMS OF USE -- How the 7x12 Group Operates
<snip>
To help achieve those
|
Re: ANSWER TO GUIDE RULE - OT
The problem with just saying only post regarding a mini lathe is After you have and have ask or read itea about a mini lathes.? There nothing left to talke about.?
So group could go months or some groups years before the next post.?
?
I saw with the Old Yahoo groups. The group just stop.?
?
The Off Topic drives the group till next on Topic.??
?
So moderator has decided the direction OT to drive or Topic only with dead time.?
?
At time you Manufacturers had group and moderator was only interested in things related to product. What happened is one's the group need to answer questions moved on. I would look at history and see this and did not join.
I am a moderate on a lot larger group than this group and thriving with lot Off Topic/subject.
It only few rules?
?
A few simple rules to follow.
?
1) No political
2) No ads
3) It ok with Any one's Wife / Girl friend?
4) It is ok for any one's child/ grandchildren see it too.
?
It could use OT or OS in first part tile but after we talk about it was decided it was not need. On this group of look at my past posts I use Off subject here.?
My latest posts is on subject?
Dave?
?
?
On Fri, Jan 24, 2025 at 02:03 PM, BuffaloJohn wrote:
Each and every member of this group got the TERMS OF USE email on Jan1. It said, in part:
?
TERMS OF USE -- How the 7x12 Group Operates
<snip>
To help achieve those goals, the following rules govern operation of this group:
?
* On-Topic posts only. <snip>
?
If you ignored it, you can find it here:
?
?
--
Buffalo John
On Fri, Jan 24, 2025 at 02:03 PM, BuffaloJohn wrote:
?
TERMS OF USE -- How the 7x12 Group Operates
<snip>
To help achieve those
|
Re: My new 4 jaw chuck for rotary table
Here's a drawing of the back plate.  ?
?
?
Dave?
|
Re: My new 4 jaw chuck for rotary table
Here the base for the rotary table in a real mini lathe being machined
?
Dave?
?
 ? *  ?
|
Re: My new 4 jaw chuck for rotary table
Like I found out is keep simple.
I have had Rotary Table that two to put on mill. That is a pain and takes time to make a simple job.
?
If only? you need for a 5 min job and takes 45 minutes to change to table and back to the vise. It make twice if really need to ise the Rotary table.?
?
This small I chuck? up in the mill vise in a minute use small 4 jaw chuck to hold part and 10 minutes later I have a finished part.?
?
Setting up for both the mill and mini lathe There times I using the mill and need to do a quick and the mini lathe is not being used.??
?
Am also setting up for drilling for same reason.??
?
When manufacturing I do simple milling lathe had only few mills . Make a jeg and use woodruff type or keyway.
?I have use a Aloris tool post too.?
?
Photo is off the Internet NOT MY LATHE..
?
Dave?
|
Re: My new 4 jaw chuck for rotary table
I believe the Z axis would be the height?of the milling attachment off the rotary table!
That is a big piece you picture.
On Fri, Jan 24, 2025 at 12:32?PM davesmith1800 via <davesmith1= [email protected]> wrote: I did not show zee axis.
Here is? the attachment.
?
?
Dave?
?
Attachments:
|
Re: ANSWER TO GUIDE RULE - OT
Each and every member of this group got the TERMS OF USE email on Jan1. It said, in part:
TERMS OF USE -- How the 7x12 Group Operates
<snip>
To help achieve those goals, the following rules govern operation of this group:
?
* On-Topic posts only.
<snip>
If you ignored it, you can find it here:
-- Buffalo John
|
Re: ANSWER TO GUIDE RULE - OT
Hi guys. Sorry to come to this a bit late, I have 2 points though. ? * I’m not sure what the problem is, as anyone can add OT to the title, as I have done. So why the continuing debate ??? ? * I am amazed at some of the replies, not only to this but others as well. Where part of the reply is in understandable English and the rest is gobbledygook !!!? I can understand and forgive ?differences where clearly English is a second or third language. But where part of the message shows the writer understands English, I despair. Doesn’t anyone read through and correct any more ? ? ??????????????? Ellis ? ? If rotary table goes a mill it is OT. But if goes Mini lathe it is $&#^$ I guess it depends on if you interested read a about putting on a mini lathe if on topic or off. If do not like what they wrote then? write moderators and say OFF TOPIC and ask to have it delete post so no has anything thing to read.?? The bottom for group to be interesting is have something to read about and better to comment on too. In November of 2023 I finally purchased a mini after reading about mini lathes since 2005. The resoan thinking a mini lathe in 2005 changed by time purchased.? I chose to write about here and gave everyone here some read and write about.? No one goes out buys a lathe every month. My first was a garulatoin present it only down payment on a $10,000 today same lathe cost $80,000 had for over 30 years. My next had for 20 years. The point is most do not go out and buy new lathe very often. So hard for very here to say a lot? .? So we all here need more than jest the mini lathes to talk about or this would a very slow group
toggle quoted message
Show quoted text
On Fri, Jan 24, 2025 at 01:10 AM, Tony Smith wrote: Rotary table is fine.? Way better than whatever this (or your lack of understanding of how motor temperature ratings work). ? Tony ? ? ? What is next thd chuck on the mini lathe is ot On Thu, Jan 23, 2025 at 03:22 PM, Tony Smith wrote: All that blah blah blah, and you still didn’t flag this thread as being off topic. ? Two keystrokes is still two too many for you, I guess. ? Tony ? (Seriously, no-one cares, not even you.) ? ? The first that only want to see mini lathes only. I seen on some? groups it has to what title is only. Second group?arsed or not wanting to make the effort to add OT to help the first group.? Now the owner and moderators are trying to keep group fun and interesting for all. Then dealing with the first group and second group not helping.? A owner and moderators have hard job at times. How mush? can you talk the subject. Some think you only talk about a mini lathes and the drill chuck is off subject.?? So soon or later you will have to go little or more off for slow times? Last year this had a long topic on bikes. It was a interesting topic to read I had nothing to say. The important part it made group interesting for slow time. If look at a few OFF topic I have post here in Tilte I put OFF SUBJECT .? I Like OT Simple hit two keys at beginning? On Wed, Jan 22, 2025 at 04:55 PM, Tony Smith wrote: Nobody cares so long as it’s not too stupid. ?The moderators will be tired of seeing this stupid crap shortly and tell us to knock it off. ? Lists die because of no traffic or too much stupid crap.? And this thread has definitely hit the latter. ? And you still can’t be arsed to add OT to the subject. ? Tony ? ? ? [Edited Message Follows]
[Reason: Sorry used html code and change ] I this some type limit off topic it best for and some one complain and others will anything under sun.? I am on some sites that OT is ok and no one goes overboard. They respect the few little rules.? - ?No political?
- No ads
- ?It ok with Any one's Wife / Girl?
- It is ok for any one's grandchildren see it too.?
Sorry forgot No html codes On Wed, Jan 22, 2025 at 02:47 AM, Tony Smith wrote: When people can’t be arsed to even use OT, they sure ain’t gunna use those either. ? This thread is off topic, look at all the people who could be bothered to mark it OT. ? Tony ? ? ? ? May have few for one for not like OFF TOPIC.? AH? ?for AROUND THE HOME? For I am OK with or without tags. I enjoy read like good old fashione Magazines?
|
Re: My new 4 jaw chuck for rotary table
I did not show zee axis.
Here is? the attachment.
?
?
Dave?
?
|
Re: My new 4 jaw chuck for rotary table
Seems like a big loss on the Z axis. Easy to fix and it's a mockup anyway, right?
On Fri, Jan 24, 2025 at 2:05?AM davesmith1800 via <davesmith1= [email protected]> wrote: Here mockup? of chuck on rotary table.??
Note 3" barstock for chuck adapter. The table is only 3" diameter?
?
The chuck 1.89" [48 mm] for small work
FYI I 5" for larger work too
?
Dave  
|
Locked
Re: ANSWER TO GUIDE RULE
I forgot rotary table.
If rotary table goes a mill it is OT.
But if goes Mini lathe it is $&#^$
I guess it depends on if you interested read a about putting on a mini lathe if on topic or off.
?
If do not like what they wrote then? write moderators and say OFF TOPIC and ask to have it delete post so no has anything thing to read.??
?
The bottom for group to be interesting is have something to read about and better to comment on too.
?
In November of 2023 I finally purchased a mini after reading about mini lathes since 2005.
The resoan thinking a mini lathe in 2005 changed by time purchased.? I chose to write about here and gave everyone here some read and write about.?
?
No one goes out buys a lathe every month. My first was a garulatoin present it only down payment on a $10,000 today same lathe cost $80,000 had for over 30 years. My next had for 20 years. The point is most do not go out and buy new lathe very often. So hard for very here to say a lot? .?
So we all here need more than jest the mini lathes to talk about or this would a very slow group
?
Dave?
?
On Fri, Jan 24, 2025 at 01:10 AM, Tony Smith wrote:
Rotary table is fine.? Way better than whatever this (or your lack of understanding of how motor temperature ratings work).
?
Tony
?
?
?
What is next thd chuck on the mini lathe is ot
On Thu, Jan 23, 2025 at 03:22 PM, Tony Smith wrote:
All that blah blah blah, and you still didn’t flag this thread as being off topic.
?
Two keystrokes is still two too many for you, I guess.
?
Tony
?
(Seriously, no-one cares, not even you.)
?
?
The first that only want to see mini lathes only. I seen on some? groups it has to what title is only.
Second group?arsed or not wanting to make the effort
to add OT to help the first group.?
Now the owner and moderators are trying to keep group fun and interesting for all.
Then dealing with the first group and second group not helping.?
A owner and moderators have hard job at times. How mush? can you talk the subject.
Some think you only talk about a mini lathes and the drill chuck is off subject.??
So soon or later you will have to go little or more off for slow times?
Last year this had a long topic on bikes. It was a interesting topic to read I had nothing to say. The important part it made group interesting for slow time.
If look at a few OFF topic I have post here in Tilte I put OFF SUBJECT .?
I Like OT Simple hit two keys at beginning?
On Wed, Jan 22, 2025 at 04:55 PM, Tony Smith wrote:
Nobody cares so long as it’s not too stupid. ?The moderators will be tired of seeing this stupid crap shortly and tell us to knock it off.
?
Lists die because of no traffic or too much stupid crap.? And this thread has definitely hit the latter.
?
And you still can’t be arsed to add OT to the subject.
?
Tony
?
?
?
[Edited Message Follows]
[Reason: Sorry used html code and change ]
I this some type limit off topic it best for and some one complain and others will anything under sun.?
I am on some sites that OT is ok and no one goes overboard. They respect the few little rules.?
- ?No political?
- No ads
- ?It ok with Any one's Wife / Girl?
- It is ok for any one's grandchildren see it too.?
Sorry forgot No html codes
On Wed, Jan 22, 2025 at 02:47 AM, Tony Smith wrote:
When people can’t be arsed to even use OT, they sure ain’t gunna use those either.
?
This thread is off topic, look at all the people who could be bothered to mark it OT.
?
Tony
?
?
?
?
May have few for one for not like OFF TOPIC.?
AH? ?for AROUND THE HOME?
For I am OK with or without tags. I enjoy read like good old fashione Magazines?
|
Locked
Re: ANSWER TO GUIDE RULE
I guess if get to hot on the lathe,? mill or drill press it is off topic.?
After all what does a motor have to do with a mini lathe.?
?
FYI any motor hears can be a fire ?.? I have temperature gauge on my mini lathe. I posted here and call on topic.
?
Painting die ? could be a little dicey on or off subjects. But helps with wife on getting a mini lathe. Happy wife happy mini lathe.?
?
Dave?
?
?
On Fri, Jan 24, 2025 at 01:10 AM, Tony Smith wrote:
Rotary table is fine.? Way better than whatever this (or your lack of understanding of how motor temperature ratings work).
?
Tony
?
?
?
What is next thd chuck on the mini lathe is ot
On Thu, Jan 23, 2025 at 03:22 PM, Tony Smith wrote:
All that blah blah blah, and you still didn’t flag this thread as being off topic.
?
Two keystrokes is still two too many for you, I guess.
?
Tony
?
(Seriously, no-one cares, not even you.)
?
?
The first that only want to see mini lathes only. I seen on some? groups it has to what title is only.
Second group?arsed or not wanting to make the effort
to add OT to help the first group.?
Now the owner and moderators are trying to keep group fun and interesting for all.
Then dealing with the first group and second group not helping.?
A owner and moderators have hard job at times. How mush? can you talk the subject.
Some think you only talk about a mini lathes and the drill chuck is off subject.??
So soon or later you will have to go little or more off for slow times?
Last year this had a long topic on bikes. It was a interesting topic to read I had nothing to say. The important part it made group interesting for slow time.
If look at a few OFF topic I have post here in Tilte I put OFF SUBJECT .?
I Like OT Simple hit two keys at beginning?
On Wed, Jan 22, 2025 at 04:55 PM, Tony Smith wrote:
Nobody cares so long as it’s not too stupid. ?The moderators will be tired of seeing this stupid crap shortly and tell us to knock it off.
?
Lists die because of no traffic or too much stupid crap.? And this thread has definitely hit the latter.
?
And you still can’t be arsed to add OT to the subject.
?
Tony
?
?
?
[Edited Message Follows]
[Reason: Sorry used html code and change ]
I this some type limit off topic it best for and some one complain and others will anything under sun.?
I am on some sites that OT is ok and no one goes overboard. They respect the few little rules.?
- ?No political?
- No ads
- ?It ok with Any one's Wife / Girl?
- It is ok for any one's grandchildren see it too.?
Sorry forgot No html codes
On Wed, Jan 22, 2025 at 02:47 AM, Tony Smith wrote:
When people can’t be arsed to even use OT, they sure ain’t gunna use those either.
?
This thread is off topic, look at all the people who could be bothered to mark it OT.
?
Tony
?
?
?
?
May have few for one for not like OFF TOPIC.?
AH? ?for AROUND THE HOME?
For I am OK with or without tags. I enjoy read like good old fashione Magazines?
|
Locked
Re: ANSWER TO GUIDE RULE
Rotary table is fine.? Way better than whatever this (or your lack of understanding of how motor temperature ratings work). ? Tony ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of davesmith1800 via groups.io
Sent: Friday, 24 January 2025 6:54 pm
To: [email protected]
Subject: Re: [7x12MiniLathe] ANSWER TO GUIDE RULE? What is next thd chuck on the mini lathe is ot On Thu, Jan 23, 2025 at 03:22 PM, Tony Smith wrote: All that blah blah blah, and you still didn’t flag this thread as being off topic. ? Two keystrokes is still two too many for you, I guess. ? Tony ? (Seriously, no-one cares, not even you.) ? ? The first that only want to see mini lathes only. I seen on some? groups it has to what title is only. Second group?arsed or not wanting to make the effort to add OT to help the first group.? Now the owner and moderators are trying to keep group fun and interesting for all. Then dealing with the first group and second group not helping.? A owner and moderators have hard job at times. How mush? can you talk the subject. Some think you only talk about a mini lathes and the drill chuck is off subject.?? So soon or later you will have to go little or more off for slow times? Last year this had a long topic on bikes. It was a interesting topic to read I had nothing to say. The important part it made group interesting for slow time. If look at a few OFF topic I have post here in Tilte I put OFF SUBJECT .? I Like OT Simple hit two keys at beginning? On Wed, Jan 22, 2025 at 04:55 PM, Tony Smith wrote: Nobody cares so long as it’s not too stupid. ?The moderators will be tired of seeing this stupid crap shortly and tell us to knock it off. ? Lists die because of no traffic or too much stupid crap.? And this thread has definitely hit the latter. ? And you still can’t be arsed to add OT to the subject. ? Tony ? ? ? [Edited Message Follows]
[Reason: Sorry used html code and change ] I this some type limit off topic it best for and some one complain and others will anything under sun.? I am on some sites that OT is ok and no one goes overboard. They respect the few little rules.? - ?No political?
- No ads
- ?It ok with Any one's Wife / Girl?
- It is ok for any one's grandchildren see it too.?
Sorry forgot No html codes On Wed, Jan 22, 2025 at 02:47 AM, Tony Smith wrote: When people can’t be arsed to even use OT, they sure ain’t gunna use those either. ? This thread is off topic, look at all the people who could be bothered to mark it OT. ? Tony ? ? ? ? May have few for one for not like OFF TOPIC.? AH? ?for AROUND THE HOME? For I am OK with or without tags. I enjoy read like good old fashione Magazines?
|
davesmith1800
BuffaloJohn