My new 4 jaw chuck for rotary table
Here mockup? of chuck on rotary table.??
Note 3" barstock for chuck adapter. The table is only 3" diameter?
?
The chuck 1.89" [48 mm] for small work
FYI I 5" for larger work too
?
Dave  
|
Locked
Re: ANSWER TO GUIDE RULE
This too
What is next thd chuck on the mini lathe is ot
?
On Thu, Jan 23, 2025 at 03:22 PM, Tony Smith wrote:
All that blah blah blah, and you still didn’t flag this thread as being off topic.
?
Two keystrokes is still two too many for you, I guess.
?
Tony
?
(Seriously, no-one cares, not even you.)
?
?
The first that only want to see mini lathes only. I seen on some? groups it has to what title is only.
Second group?arsed or not wanting to make the effort
to add OT to help the first group.?
Now the owner and moderators are trying to keep group fun and interesting for all.
Then dealing with the first group and second group not helping.?
A owner and moderators have hard job at times. How mush? can you talk the subject.
Some think you only talk about a mini lathes and the drill chuck is off subject.??
So soon or later you will have to go little or more off for slow times?
Last year this had a long topic on bikes. It was a interesting topic to read I had nothing to say. The important part it made group interesting for slow time.
If look at a few OFF topic I have post here in Tilte I put OFF SUBJECT .?
I Like OT Simple hit two keys at beginning?
On Wed, Jan 22, 2025 at 04:55 PM, Tony Smith wrote:
Nobody cares so long as it’s not too stupid. ?The moderators will be tired of seeing this stupid crap shortly and tell us to knock it off.
?
Lists die because of no traffic or too much stupid crap.? And this thread has definitely hit the latter.
?
And you still can’t be arsed to add OT to the subject.
?
Tony
?
?
?
[Edited Message Follows]
[Reason: Sorry used html code and change ]
I this some type limit off topic it best for and some one complain and others will anything under sun.?
I am on some sites that OT is ok and no one goes overboard. They respect the few little rules.?
- ?No political?
- No ads
- ?It ok with Any one's Wife / Girl?
- It is ok for any one's grandchildren see it too.?
Sorry forgot No html codes
On Wed, Jan 22, 2025 at 02:47 AM, Tony Smith wrote:
When people can’t be arsed to even use OT, they sure ain’t gunna use those either.
?
This thread is off topic, look at all the people who could be bothered to mark it OT.
?
Tony
?
?
?
?
May have few for one for not like OFF TOPIC.?
AH? ?for AROUND THE HOME?
For I am OK with or without tags. I enjoy read like good old fashione Magazines?
|
Locked
Re: ANSWER TO GUIDE RULE
All that blah blah blah, and you still didn’t flag this thread as being off topic. ? Two keystrokes is still two too many for you, I guess. ? Tony ? (Seriously, no-one cares, not even you.) ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of davesmith1800 via groups.io
Sent: Thursday, 23 January 2025 4:05 pm
To: [email protected]
Subject: Re: [7x12MiniLathe] ANSWER TO GUIDE RULE? The first that only want to see mini lathes only. I seen on some? groups it has to what title is only. Second group?arsed or not wanting to make the effort to add OT to help the first group.? Now the owner and moderators are trying to keep group fun and interesting for all. Then dealing with the first group and second group not helping.? A owner and moderators have hard job at times. How mush? can you talk the subject. Some think you only talk about a mini lathes and the drill chuck is off subject.?? So soon or later you will have to go little or more off for slow times? Last year this had a long topic on bikes. It was a interesting topic to read I had nothing to say. The important part it made group interesting for slow time. If look at a few OFF topic I have post here in Tilte I put OFF SUBJECT .? I Like OT Simple hit two keys at beginning? On Wed, Jan 22, 2025 at 04:55 PM, Tony Smith wrote: Nobody cares so long as it’s not too stupid. ?The moderators will be tired of seeing this stupid crap shortly and tell us to knock it off. ? Lists die because of no traffic or too much stupid crap.? And this thread has definitely hit the latter. ? And you still can’t be arsed to add OT to the subject. ? Tony ? ? ? [Edited Message Follows]
[Reason: Sorry used html code and change ] I this some type limit off topic it best for and some one complain and others will anything under sun.? I am on some sites that OT is ok and no one goes overboard. They respect the few little rules.? - ?No political?
- No ads
- ?It ok with Any one's Wife / Girl?
- It is ok for any one's grandchildren see it too.?
Sorry forgot No html codes On Wed, Jan 22, 2025 at 02:47 AM, Tony Smith wrote: When people can’t be arsed to even use OT, they sure ain’t gunna use those either. ? This thread is off topic, look at all the people who could be bothered to mark it OT. ? Tony ? ? ? ? May have few for one for not like OFF TOPIC.? AH? ?for AROUND THE HOME? For I am OK with or without tags. I enjoy read like good old fashione Magazines?
|
Locked
Re: ANSWER TO GUIDE RULE
The first that only want to see mini lathes only. I seen on some? groups it has to what title is only.
?
Second group?arsed or not wanting to make the effort
to add OT to help the first group.?
?
Now the owner and moderators are trying to keep group fun and interesting for all.
Then dealing with the first group and second group not helping.?
?
A owner and moderators have hard job at times. How mush? can you talk the subject.
Some think you only talk about a mini lathes and the drill chuck is off subject.??
So soon or later you will have to go little or more off for slow times?
?
Last year this had a long topic on bikes. It was a interesting topic to read I had nothing to say. The important part it made group interesting for slow time.
?
If look at a few OFF topic I have post here in Tilte I put OFF SUBJECT .?
?
I Like OT Simple hit two keys at beginning?
?
?
?
On Wed, Jan 22, 2025 at 04:55 PM, Tony Smith wrote:
Nobody cares so long as it’s not too stupid. ?The moderators will be tired of seeing this stupid crap shortly and tell us to knock it off.
?
Lists die because of no traffic or too much stupid crap.? And this thread has definitely hit the latter.
?
And you still can’t be arsed to add OT to the subject.
?
Tony
?
?
?
[Edited Message Follows]
[Reason: Sorry used html code and change ]
I this some type limit off topic it best for and some one complain and others will anything under sun.?
I am on some sites that OT is ok and no one goes overboard. They respect the few little rules.?
- ?No political?
- No ads
- ?It ok with Any one's Wife / Girl?
- It is ok for any one's grandchildren see it too.?
Sorry forgot No html codes
On Wed, Jan 22, 2025 at 02:47 AM, Tony Smith wrote:
When people can’t be arsed to even use OT, they sure ain’t gunna use those either.
?
This thread is off topic, look at all the people who could be bothered to mark it OT.
?
Tony
?
?
?
?
May have few for one for not like OFF TOPIC.?
AH? ?for AROUND THE HOME?
For I am OK with or without tags. I enjoy read like good old fashione Magazines?
|
Locked
Re: ANSWER TO GUIDE RULE
Nobody cares so long as it’s not too stupid. ?The moderators will be tired of seeing this stupid crap shortly and tell us to knock it off. ? Lists die because of no traffic or too much stupid crap.? And this thread has definitely hit the latter. ? And you still can’t be arsed to add OT to the subject. ? Tony ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of davesmith1800 via groups.io
Sent: Thursday, 23 January 2025 11:10 am
To: [email protected]
Subject: Re: [7x12MiniLathe] ANSWER TO GUIDE RULE? [Edited Message Follows]
[Reason: Sorry used html code and change ] I this some type limit off topic it best for and some one complain and others will anything under sun.? I am on some sites that OT is ok and no one goes overboard. They respect the few little rules.? - ?No political?
- No ads
- ?It ok with Any one's Wife / Girl?
- It is ok for any one's grandchildren see it too.?
Sorry forgot No html codes On Wed, Jan 22, 2025 at 02:47 AM, Tony Smith wrote: When people can’t be arsed to even use OT, they sure ain’t gunna use those either. ? This thread is off topic, look at all the people who could be bothered to mark it OT. ? Tony ? ? ? ? May have few for one for not like OFF TOPIC.? AH? ?for AROUND THE HOME? For I am OK with or without tags. I enjoy read like good old fashione Magazines?
|
Locked
Re: ANSWER TO GUIDE RULE
I know right.
?
I this some type limit off topic it best for and some one complain and others will anything under sun.?
?
I am on some sites that OT is ok and no one goes overboard. They respect the few little rules.?
?
- ?No political?
- No ads
- ?It ok with Any one's Wife / Girl?
- It is ok for any one's grandchildren see it too.?
No one has to OT
Simple?
?
Dave?
?
Sorry forgot No html codes
?
On Wed, Jan 22, 2025 at 02:47 AM, Tony Smith wrote:
When people can’t be arsed to even use OT, they sure ain’t gunna use those either.
?
This thread is off topic, look at all the people who could be bothered to mark it OT.
?
Tony
?
?
?
?
May have few for one for not like OFF TOPIC.?
AH? ?for AROUND THE HOME?
For I am OK with or without tags. I enjoy read like good old fashione Magazines?
|
Locked
Re: ANSWER TO GUIDE RULE
When people can’t be arsed to even use OT, they sure ain’t gunna use those either. ? This thread is off topic, look at all the people who could be bothered to mark it OT. ? Tony ? ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of davesmith1800 via groups.io
Sent: Wednesday, 22 January 2025 7:04 pm
To: [email protected]
Subject: Re: [7x12MiniLathe] ANSWER TO GUIDE RULE? May have few for one for not like OFF TOPIC.? AH? ?for AROUND THE HOME? For I am OK with or without tags. I enjoy read like good old fashione Magazines?
|
Locked
Re: ANSWER TO GUIDE RULE
May have few for one for not like OFF TOPIC.?
?
OT? ? for OFF TOPIC
AH? ?for AROUND THE HOME?
PR? ? for PROJECTS?
MM? For Mini Mill
?
For I am OK with or without tags. I enjoy read like good old fashione Magazines?
?
Dave?
|
My chuck comes with a sub to fit in a ? drill motor
? let begin.
?
Dave?
?
|
The first I just pressman error .?
But second time?
WHAT
?
Dave?
?
On Mon, Jan 20, 2025 at 04:55 AM, <flyfishingdude9@...> wrote:
On Sun, Jan 19, 2025 at 07:48 PM, Roy wrote:
Needs to be made of something that resists corrosion from blood.
Great! I just spit coffee all over my computer monitor! ?
|
On Sun, Jan 19, 2025 at 07:48 PM, Roy wrote:
Needs to be made of something that resists corrosion from blood.
Great! I just spit coffee all over my computer monitor! ?
|
Locked
Re: ANSWER TO GUIDE RULE
I think the convention is to use "OT" for "Off Topic."? Don't need any periods.
Charles E. "Chuck" Kinzer
On Sunday, January 19, 2025 at 07:14:38 PM PST, davesmith1800 <davesmith1@...> wrote:
It a balance of on subject and off subject.? Off subject can keep a group a live in slow times.?
1) It more how far off subject.
2) I think the title should say OS or? O.S. for off subject.?
This any does read about off subject they can skip it.
3) The what is on subject only talk about mini lathes or mills or projects maybe even using the lathe for anything.??
?
It nice if could have two threads here one for on subject and one off subject.
?
Best opinion is in tilte say OS or? O.S.
?
Dave?
?
FYI
I ran across your Aloris milling Attachment on different site nice work?
?
On Sun, Jan 19, 2025 at 05:28 PM, OldToolmaker wrote:
Does it really matter if someone likes something. I think that is a personal opinion and not relevant to the group as a whole.
Dick
Attachments:
|
Locked
Re: ANSWER TO GUIDE RULE
It a balance of on subject and off subject.? Off subject can keep a group a live in slow times.?
1) It more how far off subject.
2) I think the title should say OS or? O.S. for off subject.?
This any does read about off subject they can skip it.
3) The what is on subject only talk about mini lathes or mills or projects maybe even using the lathe for anything.??
?
It nice if could have two threads here one for on subject and one off subject.
?
Best opinion is in tilte say OS or? O.S.
?
Dave?
?
FYI
I ran across your Aloris milling Attachment on different site nice work?
?
On Sun, Jan 19, 2025 at 05:28 PM, OldToolmaker wrote:
Does it really matter if someone likes something. I think that is a personal opinion and not relevant to the group as a whole.
Dick
|
Locked
Re: ANSWER TO GUIDE RULE
Does it really matter if someone likes something. I think that is a personal opinion and not relevant to the group as a whole. Dick
|
Re: Stuart Score steam engine.
I know.? But I am trying to not spend the 20 British Pounds plus shipping.
Howard Garner
On Sunday, January 19, 2025 at 07:54:53 PM EST, Roy via groups.io <roylowenthal@...> wrote:
It looks like Stuart will sell you construction details:
?
?< >
?
Roy
|
Re: Stuart Score steam engine.
It looks like Stuart will sell you construction details:
?
?< >
?
Roy
|
Needs to be made of something that resists corrosion from blood.
?
Roy
|
Backplate for chuck?
Note ?NC tape hole for hold down? parts in chuck .
Handy to one in center.?
?
Dave
?
?
?
On Sun, Jan 19, 2025 at 07:24 AM, Mark Kimball wrote:
How is that chuck mounted on your RT?? The 3-jaw I got for mine has a "skirt" around its base with 4 screw holes.? They match the 4 T-nut slots on the top of the RT.
|
Here is a 4 jaw chuck on a hand drill.
Looks like fun and trip say to hospital staff .
?
?
|
Off the internet of backs for rotary tables
|
davesmith1800
OldToolmaker