¿ªÔÆÌåÓý

Date

Re: this is pretty cool

 

way back when, thinking Shell Goria G oil(sp.?), later in a oil field shop on Horz. boring mill I used a reamer appearing item with linear type rollers for 1 1/2" slip pin hole finishes in forgings , just fed it in and back out of drilled holes like a reamer,soluble fluid in that shop, it came in 50 gallon drums, sorry, it's been 50 years ago

In a message dated 12/11/2023 1:09:52 PM Pacific Standard Time, johndurbetaki@... writes:
?

oil

On Mon, Dec 11, 2023 at 12:36?PM Miket_NYC <mctaglieri@...> wrote:
You said you use "fluid" for this. What kind?
?
Mike Taglieri?

On Mon, Dec 11, 2023, 7:38 AM Charles Devore via <Claremont5=[email protected]> wrote:
Burnishing has it's place, doesn't remove material, but looks nice, we always used fluid, I suspect that material is "free machining" type and since it is asia is most likely "leadolly"(no longer used much here=epa), if a really nice bearing surface is needed, just rough it around .004 oversize and then run the parts thru a centerless grinder "plunge cutting each one it goes pretty quick

In a message dated 12/10/2023 11:11:14 PM Pacific Standard Time, d.i.williams=[email protected] writes:
?
Dear Mr Animal,

May I ask some related questions for the group to ponder?

Firstly, ¡ª Thank you very much (Mr Animal) for posting this? - I found it very interesting and the style of the video was both very sharp & polished. (Pun intended)
(I looked at the chuck and thought - this looks like a rather large chuck on a 7 x X lathe?.)

1. Seriously, is this an industry standard practice for polishing metals in a lathe?

2. A tongue in cheek question¡­¡­ As a matter of interest, if you had a similar large tool held in a milling machine and run using very close passes over the surface, would it (sort of) polish a flat piece of work? I realise it would not have quite the same effect as the work is not spinning. But the tool is. (Unless it was on a rotary table and you were turning it very very fast.?) Perhaps run in two passes at 90deg. to each other. Producing a sort of diamond effect? Does anyone have any knowledge?

3. Would you get a sort of similar(?) effect using a small(?) spherical shaped ball bearing held in a holder on a (mini) lathe?

Thank you all, in anticipation.

All in all, very interesting. Thank you. Just the harden steel ball doing the polishing.

David UK.
> On 11 Dec 2023, at 04:31, mike allen <animal@...> wrote:
>
>
>
> Watched this a few nites back , pretty cool
>
> animal
>
>
>
>
>
>






?

?


--
Buffalo John


Re: this is pretty cool

 

oil

On Mon, Dec 11, 2023 at 12:36?PM Miket_NYC <mctaglieri@...> wrote:
You said you use "fluid" for this. What kind?

Mike Taglieri?

On Mon, Dec 11, 2023, 7:38 AM Charles Devore via <Claremont5=[email protected]> wrote:
Burnishing has it's place, doesn't remove material, but looks nice, we always used fluid, I suspect that material is "free machining" type and since it is asia is most likely "leadolly"(no longer used much here=epa), if a really nice bearing surface is needed, just rough it around .004 oversize and then run the parts thru a centerless grinder "plunge cutting each one it goes pretty quick

In a message dated 12/10/2023 11:11:14 PM Pacific Standard Time, d.i.williams=[email protected] writes:
?
Dear Mr Animal,

May I ask some related questions for the group to ponder?

Firstly, ¡ª Thank you very much (Mr Animal) for posting this? - I found it very interesting and the style of the video was both very sharp & polished. (Pun intended)
(I looked at the chuck and thought - this looks like a rather large chuck on a 7 x X lathe?.)

1. Seriously, is this an industry standard practice for polishing metals in a lathe?

2. A tongue in cheek question¡­¡­ As a matter of interest, if you had a similar large tool held in a milling machine and run using very close passes over the surface, would it (sort of) polish a flat piece of work? I realise it would not have quite the same effect as the work is not spinning. But the tool is. (Unless it was on a rotary table and you were turning it very very fast.?) Perhaps run in two passes at 90deg. to each other. Producing a sort of diamond effect? Does anyone have any knowledge?

3. Would you get a sort of similar(?) effect using a small(?) spherical shaped ball bearing held in a holder on a (mini) lathe?

Thank you all, in anticipation.

All in all, very interesting. Thank you. Just the harden steel ball doing the polishing.

David UK.
> On 11 Dec 2023, at 04:31, mike allen <animal@...> wrote:
>
>
>
> Watched this a few nites back , pretty cool
>
> animal
>
>
>
>
>
>







--
Buffalo John


Re: this is pretty cool

 

You said you use "fluid" for this. What kind?

Mike Taglieri?

On Mon, Dec 11, 2023, 7:38 AM Charles Devore via <Claremont5=[email protected]> wrote:
Burnishing has it's place, doesn't remove material, but looks nice, we always used fluid, I suspect that material is "free machining" type and since it is asia is most likely "leadolly"(no longer used much here=epa), if a really nice bearing surface is needed, just rough it around .004 oversize and then run the parts thru a centerless grinder "plunge cutting each one it goes pretty quick

In a message dated 12/10/2023 11:11:14 PM Pacific Standard Time, d.i.williams=[email protected] writes:
?
Dear Mr Animal,

May I ask some related questions for the group to ponder?

Firstly, ¡ª Thank you very much (Mr Animal) for posting this? - I found it very interesting and the style of the video was both very sharp & polished. (Pun intended)
(I looked at the chuck and thought - this looks like a rather large chuck on a 7 x X lathe?.)

1. Seriously, is this an industry standard practice for polishing metals in a lathe?

2. A tongue in cheek question¡­¡­ As a matter of interest, if you had a similar large tool held in a milling machine and run using very close passes over the surface, would it (sort of) polish a flat piece of work? I realise it would not have quite the same effect as the work is not spinning. But the tool is. (Unless it was on a rotary table and you were turning it very very fast.?) Perhaps run in two passes at 90deg. to each other. Producing a sort of diamond effect? Does anyone have any knowledge?

3. Would you get a sort of similar(?) effect using a small(?) spherical shaped ball bearing held in a holder on a (mini) lathe?

Thank you all, in anticipation.

All in all, very interesting. Thank you. Just the harden steel ball doing the polishing.

David UK.
> On 11 Dec 2023, at 04:31, mike allen <animal@...> wrote:
>
>
>
> Watched this a few nites back , pretty cool
>
> animal
>
>
>
>
>
>







Ball handle

 

based on some of the questions from the last vid . Here's what happens when the ball is made to spin/roll in only one direction .



animal


Re: this is pretty cool

 

¿ªÔÆÌåÓý

It's also pretty expensive , based on last time I wanted to buy some .

animal

On 12/11/23 7:08 AM, Charles Kinzer wrote:

Just a minor correction in case anyone wants to look for it.? It is "Leadloy", not "Leadolly."? More officially, the alloy is 12L14.

It is a very free machining steel alloy (as in "try it, you'll like it") and used in making a lot of automatic screw machine parts.? I don't know if that is still true today as something else might be being used now.? I didn't research that aspect.

Yes, it contains lead.? You should do your own homework, but it has been my understanding that for regular machining there is no particular hazard.? For welding, I think there is risk.? And probably also for grinding.? I look at this like the risk of beryllium.? It is very hazardous by itself but alloyed with copper (beryllium-copper) normal machining is safe and many hand tools are even made of it since it won't produce sparks.? Good for use around things like thermite or explosives.

Charles E. "Chuck" Kinzer

On Monday, December 11, 2023 at 04:38:49 AM PST, Charles Devore via groups.io <claremont5@...> wrote:


Burnishing has it's place, doesn't remove material, but looks nice, we always used fluid, I suspect that material is "free machining" type and since it is asia is most likely "leadolly"(no longer used much here=epa), if a really nice bearing surface is needed, just rough it around .004 oversize and then run the parts thru a centerless grinder "plunge cutting each one it goes pretty quick

In a message dated 12/10/2023 11:11:14 PM Pacific Standard Time, d.i.williams@... writes:
?
Dear Mr Animal,

May I ask some related questions for the group to ponder?

Firstly, ¡ª Thank you very much (Mr Animal) for posting this? - I found it very interesting and the style of the video was both very sharp & polished. (Pun intended)
(I looked at the chuck and thought - this looks like a rather large chuck on a 7 x X lathe?.)

1. Seriously, is this an industry standard practice for polishing metals in a lathe?

2. A tongue in cheek question¡­¡­ As a matter of interest, if you had a similar large tool held in a milling machine and run using very close passes over the surface, would it (sort of) polish a flat piece of work? I realise it would not have quite the same effect as the work is not spinning. But the tool is. (Unless it was on a rotary table and you were turning it very very fast.?) Perhaps run in two passes at 90deg. to each other. Producing a sort of diamond effect? Does anyone have any knowledge?

3. Would you get a sort of similar(?) effect using a small(?) spherical shaped ball bearing held in a holder on a (mini) lathe?

Thank you all, in anticipation.

All in all, very interesting. Thank you. Just the harden steel ball doing the polishing.

David UK.
> On 11 Dec 2023, at 04:31, mike allen <animal@...> wrote:
>
>
>
> Watched this a few nites back , pretty cool
>
> animal
>
>
>
>
>
>







Re: $1000 Budget: Which 7 x 14 to buy?

 
Edited

How is the hunting going?

Dave

FYI?
I just got a mini lathe in November for under $600.00 metric/inch . Had to purchase steady rest $75? and 4 jaw $75 and back plate $38.? Note buy good tool post too


Re: What projects are you doing?

 

¿ªÔÆÌåÓý

This weekend I curbside-picked a nice sturdy rolling wardrobe rack that had a missing threaded insert for one of the bottom wheels ( quite nice 4¡± casters with locks, so if nothing else, hey free casters!) looks like a fairly quick job of turning some stock down to fit the ID and drill and tap the hole for the caster threads. We are currently using an old-beat up drying rack for this so the Mrs will be happy to get something better suited¡­if we can find room for it, as it¡¯s fairly large.



On Dec 10, 2023, at 10:11 AM, Ryan H via groups.io <ifly172@...> wrote:

Nothing major here currently. Last project was making some inserts for dining room chairs. They're threaded 9/16 x 16 on the outside and 3/8 x 24 on the inside. Neither are common in the real world anymore and weren't easily available. Single pointed the outside and tapped the inside.?
On Dec 10, 2023 at 10:50?AM -0500, davesmith1800 <davesmith1@...>, wrote:
Right now I my projects is setting up my lathe .? Now what is next?

Dave?

--?
Bruce Johnson

The less a man knows about how sausages and laws are made, the easier it is to steal his vote and give him botulism.


Re: What projects are you doing?

 
Edited

There a few drawings on internet fof beginners.?
It basically has projects that are steps. With basic turning, then tapping and last is a hammer using a 4 jaw chuck. All made on the lathe no mill/drill. The drawings was made for schools.?

Dave


Re: this is pretty cool

 

Copper-Beryllium are very useful tools as they are totally non-magnetic.? We used them in the assembly of the single focusing mass spectrometers on the NASA Skylab and double focusing instruments on the Viking programs in the 1960s and 1970s.

ralphie


Re: this is pretty cool

 

¿ªÔÆÌåÓý

Yes, He got a new subscriber to day,

Not a 7x12, however, a beautiful job description.

/johannes

?

?

?

From: mike allen
Sent: s?ndag 10. desember 2023 22:31
To: [email protected]; [email protected]; [email protected]
Subject: [7x12MiniLathe] this is pretty cool

?

https://www.youtube.com/watch?v=mB_C8VdZ0r0

?

Watched this a few nites back , pretty cool

?

animal

?

?

?

?

?

?


Re: this is pretty cool

 

I have use a lot of 12L14 the name is a pld brand name.?
It is one easiest to cut steel great for mini lathes use.? I used in screw machines and 1144.?

The draw backs is can be hard to weld, soft and can not be used around food production.?

My self I use 12L14, 1144, A36 and O1/W1 tool steel .

Dave?


Re: this is pretty cool

 

standing corrected(S)

In a message dated 12/11/2023 7:08:56 AM Pacific Standard Time, ckinzer@... writes:
?

?
Just a minor correction in case anyone wants to look for it.? It is "Leadloy", not "Leadolly."? More officially, the alloy is 12L14.
?
It is a very free machining steel alloy (as in "try it, you'll like it") and used in making a lot of automatic screw machine parts.? I don't know if that is still true today as something else might be being used now.? I didn't research that aspect.
?
Yes, it contains lead.? You should do your own homework, but it has been my understanding that for regular machining there is no particular hazard.? For welding, I think there is risk.? And probably also for grinding.? I look at this like the risk of beryllium.? It is very hazardous by itself but alloyed with copper (beryllium-copper) normal machining is safe and many hand tools are even made of it since it won't produce sparks.? Good for use around things like thermite or explosives.
?
Charles E. "Chuck" Kinzer
?
On Monday, December 11, 2023 at 04:38:49 AM PST, Charles Devore via groups.io <claremont5@...> wrote:
?
?
Burnishing has it's place, doesn't remove material, but looks nice, we always used fluid, I suspect that material is "free machining" type and since it is asia is most likely "leadolly"(no longer used much here=epa), if a really nice bearing surface is needed, just rough it around .004 oversize and then run the parts thru a centerless grinder "plunge cutting each one it goes pretty quick

In a message dated 12/10/2023 11:11:14 PM Pacific Standard Time, d.i.williams@... writes:
?
Dear Mr Animal,

May I ask some related questions for the group to ponder?

Firstly, ¡ª Thank you very much (Mr Animal) for posting this? - I found it very interesting and the style of the video was both very sharp & polished. (Pun intended)
(I looked at the chuck and thought - this looks like a rather large chuck on a 7 x X lathe?.)

1. Seriously, is this an industry standard practice for polishing metals in a lathe?

2. A tongue in cheek question¡­¡­ As a matter of interest, if you had a similar large tool held in a milling machine and run using very close passes over the surface, would it (sort of) polish a flat piece of work? I realise it would not have quite the same effect as the work is not spinning. But the tool is. (Unless it was on a rotary table and you were turning it very very fast.?) Perhaps run in two passes at 90deg. to each other. Producing a sort of diamond effect? Does anyone have any knowledge?

3. Would you get a sort of similar(?) effect using a small(?) spherical shaped ball bearing held in a holder on a (mini) lathe?

Thank you all, in anticipation.

All in all, very interesting. Thank you. Just the harden steel ball doing the polishing.

David UK.
> On 11 Dec 2023, at 04:31, mike allen <animal@...> wrote:
>
>
>
> Watched this a few nites back , pretty cool
>
> animal
>
>
>
>
>
>







Re: this is pretty cool

 

Just a minor correction in case anyone wants to look for it.? It is "Leadloy", not "Leadolly."? More officially, the alloy is 12L14.

It is a very free machining steel alloy (as in "try it, you'll like it") and used in making a lot of automatic screw machine parts.? I don't know if that is still true today as something else might be being used now.? I didn't research that aspect.

Yes, it contains lead.? You should do your own homework, but it has been my understanding that for regular machining there is no particular hazard.? For welding, I think there is risk.? And probably also for grinding.? I look at this like the risk of beryllium.? It is very hazardous by itself but alloyed with copper (beryllium-copper) normal machining is safe and many hand tools are even made of it since it won't produce sparks.? Good for use around things like thermite or explosives.

Charles E. "Chuck" Kinzer

On Monday, December 11, 2023 at 04:38:49 AM PST, Charles Devore via groups.io <claremont5@...> wrote:


Burnishing has it's place, doesn't remove material, but looks nice, we always used fluid, I suspect that material is "free machining" type and since it is asia is most likely "leadolly"(no longer used much here=epa), if a really nice bearing surface is needed, just rough it around .004 oversize and then run the parts thru a centerless grinder "plunge cutting each one it goes pretty quick

In a message dated 12/10/2023 11:11:14 PM Pacific Standard Time, d.i.williams@... writes:
?

Dear Mr Animal,

May I ask some related questions for the group to ponder?

Firstly, ¡ª Thank you very much (Mr Animal) for posting this? - I found it very interesting and the style of the video was both very sharp & polished. (Pun intended)
(I looked at the chuck and thought - this looks like a rather large chuck on a 7 x X lathe?.)

1. Seriously, is this an industry standard practice for polishing metals in a lathe?

2. A tongue in cheek question¡­¡­ As a matter of interest, if you had a similar large tool held in a milling machine and run using very close passes over the surface, would it (sort of) polish a flat piece of work? I realise it would not have quite the same effect as the work is not spinning. But the tool is. (Unless it was on a rotary table and you were turning it very very fast.?) Perhaps run in two passes at 90deg. to each other. Producing a sort of diamond effect? Does anyone have any knowledge?

3. Would you get a sort of similar(?) effect using a small(?) spherical shaped ball bearing held in a holder on a (mini) lathe?

Thank you all, in anticipation.

All in all, very interesting. Thank you. Just the harden steel ball doing the polishing.

David UK.
> On 11 Dec 2023, at 04:31, mike allen <animal@...> wrote:
>
> https://www.youtube.com/watch?v=mB_C8VdZ0r0
>
> Watched this a few nites back , pretty cool
>
> animal
>
>
>
>
>
>







Re: 7x16 Spindle to Tailstock Alignment Test Outcome

 

If I put the test bar MT3 in the spindle loosely, put the liver center tip in on the tailstock loosely, then seat them by sharply pushing in the tailstock while turning slowly, the system aligns to 0.0015¡± max deviation over 8¡± - better!

The headstock alone appears a culprit, with up to 0.008¡± deviation when mounted in the spindle alone (several times). That would be worth some bolt adjustment and shimming, as recommended. I gave the ways and headstock surfaces a good wipe down before reassembly.

I scraped some paint off both the ways and headstock contact surfaces - I dunno if the factory adjusts for true after assembly or if my machine was even farther off before I cleaned it up.


Re: this is pretty cool

 

Burnishing has it's place, doesn't remove material, but looks nice, we always used fluid, I suspect that material is "free machining" type and since it is asia is most likely "leadolly"(no longer used much here=epa), if a really nice bearing surface is needed, just rough it around .004 oversize and then run the parts thru a centerless grinder "plunge cutting each one it goes pretty quick

In a message dated 12/10/2023 11:11:14 PM Pacific Standard Time, d.i.williams@... writes:
?

Dear Mr Animal,

May I ask some related questions for the group to ponder?

Firstly, ¡ª Thank you very much (Mr Animal) for posting this? - I found it very interesting and the style of the video was both very sharp & polished. (Pun intended)
(I looked at the chuck and thought - this looks like a rather large chuck on a 7 x X lathe?.)

1. Seriously, is this an industry standard practice for polishing metals in a lathe?

2. A tongue in cheek question¡­¡­ As a matter of interest, if you had a similar large tool held in a milling machine and run using very close passes over the surface, would it (sort of) polish a flat piece of work? I realise it would not have quite the same effect as the work is not spinning. But the tool is. (Unless it was on a rotary table and you were turning it very very fast.?) Perhaps run in two passes at 90deg. to each other. Producing a sort of diamond effect? Does anyone have any knowledge?

3. Would you get a sort of similar(?) effect using a small(?) spherical shaped ball bearing held in a holder on a (mini) lathe?

Thank you all, in anticipation.

All in all, very interesting. Thank you. Just the harden steel ball doing the polishing.

David UK.
> On 11 Dec 2023, at 04:31, mike allen <animal@...> wrote:
>
> https://www.youtube.com/watch?v=mB_C8VdZ0r0
>
> Watched this a few nites back , pretty cool
>
> animal
>
>
>
>
>
>







Re: What projects are you doing?

 

That's what I normally do. But as a lathe operator I feel I should know and be able to do the basics.?

george

On Sunday, December 10, 2023 at 07:07:36 PM PST, Chris Albertson <albertson.chris@...> wrote:




On Dec 10, 2023, at 4:20?PM, gcvisalia@... wrote:

And I'm still trying to learn how to turn threads !

99% of the time you would use a die to cut thread. ?If that does not work, redesign the part.

Generally, you turn the metal down to the major thread diameter, then use a die.

Building a timing belt pulley is easy too. ?Say the?pulley is 32 mm in diameter. ?Then print one in plastic that has a 24 mm hole in the?center. Use the lathe and boring bar to trure the printed hole. ?Make a 24mm metal disk and epoxy the metal hub into the ring of teeth. ?Plastic gear hubs don¡¯t last long but plastic groves do. ??

The idea is to make it easy, ?They call it ¡°designing for?manufacturability¡±. If you know that you only have a mini lath and a semi-skilled operator (me) then don¡¯t design parts that require high?tolerances.



Re: this is pretty cool

 

Dear Mr Animal,

May I ask some related questions for the group to ponder?

Firstly, ¡ª Thank you very much (Mr Animal) for posting this - I found it very interesting and the style of the video was both very sharp & polished. (Pun intended)
(I looked at the chuck and thought - this looks like a rather large chuck on a 7 x X lathe?.)

1. Seriously, is this an industry standard practice for polishing metals in a lathe?

2. A tongue in cheek question¡­¡­ As a matter of interest, if you had a similar large tool held in a milling machine and run using very close passes over the surface, would it (sort of) polish a flat piece of work? I realise it would not have quite the same effect as the work is not spinning. But the tool is. (Unless it was on a rotary table and you were turning it very very fast.?) Perhaps run in two passes at 90deg. to each other. Producing a sort of diamond effect? Does anyone have any knowledge?

3. Would you get a sort of similar(?) effect using a small(?) spherical shaped ball bearing held in a holder on a (mini) lathe?

Thank you all, in anticipation.

All in all, very interesting. Thank you. Just the harden steel ball doing the polishing.

David UK.

On 11 Dec 2023, at 04:31, mike allen <animal@...> wrote:

?

Watched this a few nites back , pretty cool

animal






this is pretty cool

 



Watched this a few nites back , pretty cool

animal


Re: What projects are you doing?

Chris Albertson
 

¿ªÔÆÌåÓý



On Dec 10, 2023, at 4:20?PM, gcvisalia@... wrote:

And I'm still trying to learn how to turn threads !

99% of the time you would use a die to cut thread. ?If that does not work, redesign the part.

Generally, you turn the metal down to the major thread diameter, then use a die.

Building a timing belt pulley is easy too. ?Say the?pulley is 32 mm in diameter. ?Then print one in plastic that has a 24 mm hole in the?center. Use the lathe and boring bar to trure the printed hole. ?Make a 24mm metal disk and epoxy the metal hub into the ring of teeth. ?Plastic gear hubs don¡¯t last long but plastic groves do. ??

The idea is to make it easy, ?They call it ¡°designing for?manufacturability¡±. If you know that you only have a mini lath and a semi-skilled operator (me) then don¡¯t design parts that require high?tolerances.



Re: What projects are you doing?

 

I may make hand crank.
My next project is installing a good Aloris AXA tool post on the lathe.?
DC power feed
South bend tapper attachment?
After that is a follower rest.

Then will be low speed tapping.?

Dave?