Re: how to.inspect.motor?
|
Progress!! I turned the lathe around, I was surprised?how heavy the lathe is. I removed the shield, and the motor cover. I also removed the control panel from the front so that I could inspect the brush on the front. The brush on the front looks?great, there is still 3/4" of brush and the wear surface has a nice concave face. It looks like only the top 1/16th of the brush could have contact,?but there was no sign of contact wear.. The lower part of the brush had a crud accumulation and there was no contact wear.
I could flatten the face.Should I do more than that? I possible could make a triangle on the face, but not sure how.
Ralph
On Sun, Jun 30, 2024 at 4:26?PM davesmith1800 via <davesmith1= [email protected]> wrote: I have found the bug problem with magnetic starters. They are pain but to find and get too.?
Dave?
On Fri, Jun 28, 2024 at 01:00 PM, Ralph Hulslander wrote:
My.motor.is.behaving.badly. How.do. I inspect the motor? Do I just flip it on its side to get to the? motor?
|
