Hi All,
After putting it off for way too long; I'm finally getting around to
upgrading my HF 93212 mini lathe with the LMS 5000 16" bed extension.
I have the lathe torn down. Decided to play it safe and put the
parts/screws in ziploc bags and label the bags with a sharpie so I won't
forget what they are. Also checked off each step in the instructions as
I disassembled the lathe.
Any tips/advice before I start Reassembly?? I did slip the carriage on
out of curiosity to see how it fit.? The front is fairly snug, but
there's a noticeable amount of play in the rear.
Stan
