Re: to oil or not to oil, that is the question
|
For these small lathes, just about anything used for lubrication will suffice.? For example, some buy expensive way oil, but they could use just about anything.? The reason is that the forces, and in most cases the frequency of use, are rather trivial on a machine this size, and even more so for the average hobbyist who may seldom use it.? The goal of rust prevention is typically a larger issue.
On a larger lathe in an industrial 24-7 machining situation at high speeds, high forces, and trying to get every last bit of performance out of a machine, using proper products at proper intervals becomes very important.? But not really for these little machines.? Just to anything to keep the moving parts from getting bone dry, and keep the surfaces coated with something to prevent rust, and you'll be fine.
Charles E. "Chuck" Kinzer
On Tuesday, January 9, 2024 at 09:47:13 AM PST, davesmith1800 <davesmith1@...> wrote:
More should be said about lubrication on lathes and mills.?
Lubrication make the lathe and mill last for every.?
Dave?
|
