开云体育

Thanks Rich, I will go and check it out. Paul

the http://www.homemetalshopclub.org/projects/sawstand/sawstand.html This link has a picture and tells about adding on a coolant system. The pan does not swivel with the saw. Only used in the down

Is the DOALL brand saw the same saw as the HF and other imports? Thanks, JS

Accordin to what some fellers have told me ... a blade will wear on on one side of the teeth after a period of extended use. They say bout all ya can do is replace the blade. I wudn't think a new saw

Hi all, my name is Bill. I bought my 4x6 bandsaw from Tractor supply locally for 179$. THeir brand name is Clarke. My bandsaw, im not sure if its the blade guides or how they drilled the castings, but

I am a new member here, and I just bought myself a new Jet bandsaw this past weekend. I would like to thank everyone here for their posts because it was this sight that convinced me a saw like this

Sean, do you have a part number for that blade. I went to their site and cannot find it. Paul Maples 115 Hefner Street Searcy, Arkansas 72143 Home Tel: (501) 279-0566 Cell Tel: (501) 230-8229

Thanks Tex, I will go and check it out. Paul Maples 115 Hefner Street Searcy, Arkansas 72143 Home Tel: (501) 279-0566 Cell Tel: (501) 230-8229 pmaples@...

Get rid of it after you wear it out..Bob wrote: the to the for

Checkout message #557 or see "Files" and click on "Coolant System". Don't see how ya can beat that feller's rig. ... :o) TEX ------------------------- Based on the input from this forum I know that I

Based on the input from this forum I know that I must get rid of the blade that came on the saw and get a b-metal blade and I am going to do this. I also see where some folks are converting their saws

I ordered my Lenox Diemaster 10-14 blade from J&L Industrial Supply (http://www.jlindustrial.com). They also carry the Lenox Band-Ade cutting fluid. The Lenox blade is absolutely wonderful and is just

Thanks Catboat. Any suggestions on where to get a better vise or how to make one. I had to do some grinding on the leadscrew nut of this one before it would work right, it had a casting bard left on

In a message dated 2/2/2004 7:30:16 PM Pacific Standard Time, pmaples@... writes: I was wondering if any of you folks had any suggestions for me before I power this thing up and start using it.

Neat idea. Where did ya git the pump or what type? They use a similar settlin tank when they drill fer oil only a lot bigger. ... TEX -------------------------- I use only Lenox bi-metal blades in my

I use only Lenox bi-metal blades in my 4x6 bandsaw. Also, I use water soluble oil/water as a coolant solution that is recirculated by a little pump. The cuts are precise and quick. The blades last

Hi Paul, I bought the same saw about 6 weeks ago. I like it a lot. A few comments: 1) It will easily function in vertical mode if you unscrew the pin that attached the saw to the downfeed piston. 2)

Hello Gang, I am new to this forum. I just purchased a Grizzly G9742 4" x 6" Metal-Cutting Bandsaw with Swivel Head. Just got it setup and have not used it yet. I was wondering if any of you folks had

AAAAK! Thanks for the correction, Dave. YES, the Starrett blades I get ARE bi-metal! Sorry about that! Senior moment... ";-) Big difference in performance and also in longevity. Bi-metal blades are

Would some of you mind telling me your saw blade preferences? Manufacturers but also do you prefer high speed steel or bi-metal, or? And for what uses each? J.Walker Remember, You are unique and