Ted, I have no regrets going with the Enco saw. I got the cheapest
version, the one with the non-USA, non-UL motor and haven't had a
problem with it.
Mine is on a mobile base that I welded up from square steel tubing
and flat bar. The saw is bolted to the mobile base and is very solid
with it set up this way, quite unlike the flimsy factory arrangement.
Happy Holidays,
Alan Riley
toggle quoted message
Show quoted text
----- Original Message -----
From: <embfeniscowles12@...>
To: <4x6bandsaw@...>
Sent: Tuesday, December 16, 2003 11:28 AM
Subject: [4x6bandsaw] Re: Cast Iron Blade Guide Brackets:
Alan: Thanks for speedy answer. As a company I think I prefer Enco
ove HF. After holidays I shall go to Enco. Regards Ted.
--- In 4x6bandsaw@..., "Alan Riley" <ariley@c...> wrote:
Ted, my Enco has cast iron blade guide brackets.
Alan Riley
----- Original Message -----
From: "embfeniscowles12" <embfeniscowles12@y...>
To: <4x6bandsaw@...>
Sent: Sunday, December 14, 2003 4:39 PM
Subject: [4x6bandsaw] Cast Iron Blade Guide Brackets:
There are many sources of supply for the 4x6 Bandsaw. Will
someone be
good enough to tell me who supplies the bandsaw with cast iron
blade
guide brackets rather than pressed steel. Thanks for your help.
Ted
Burrow.
Yahoo! Groups Sponsor
ADVERTISEMENT
To unsubscribe from this group, send an email to:
4x6bandsaw-unsubscribe@...
Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
To unsubscribe from this group, send an email to:
4x6bandsaw-unsubscribe@...
Yahoo! Groups Sponsor
ADVERTISEMENT
--------------------------------------------------------------------------
------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
b.. To unsubscribe from this group, send an email to:
4x6bandsaw-unsubscribe@...
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
