Well said animal!
On 12/18/2020 9:54 AM, mike allen
wrote:
toggle quoted message
Show quoted text
??? ??? friends don't let friends use Facebook
??? ??? animal
On 12/18/2020 6:43 AM, Bill in OKC
too via groups.io wrote:
I do not and will not use Facebook.? Someone else will
have to do that if it's how the group decides to go. I
have been told by several people that the Facebook format
is not good for a group like ours. It works better for
current events and idle chitchat, but is difficult to find
older info in. I don't know that from personal experience,
however.
Bill in OKC
William R. Meyers, MSgt, USAF(Ret.)
A
human being should be able to change a diaper,
plan an invasion,
butcher a hog,
conn a ship, design a building, write a sonnet,
balance
accounts, build
a wall, set a bone, comfort the dying, take
orders,
give orders,
cooperate, act alone, solve equations, analyze a
new
problem, pitch
manure, program a computer, cook a tasty meal,
fight
efficiently,
die gallantly. Specialization is for insects.
LAZARUS LONG
(Robert A. Heinlein)
On Friday, December 18, 2020, 08:21:24 AM CST,
WHEELER GREEN
<sparco505@...>
wrote:
How about starting the group in Facebook??
Sent via
the Samsung Galaxy S7 edge, an AT&T 4G LTE
smartphone
-------- Original message --------
Date: 12/18/20 8:59 AM (GMT-05:00)
Subject: Re: [4x6bandsaw] What Should We Do
About Group Storage?
Maybe google drive for photos and docs would be an
option... linked, stickied, granted authority for
anyone to alter/add/remove. 15g free I believe. I
appreciate everyone here who is contributing and
managing this group, it’s an excellent resource
albeit for a very cheap machine that is owned
generally by people who can’t afford a better one
that wouldn’t need mods and alterations, myself
included. If I have to pay on this group I likely
won’t stay, it’s antithetical to the whole reason I
joined to start. I needed a meta cutting bandsaw and
couldn’t afford a more quality piece so I bought the
hf version and immediately needed to make some mods
which were all essentially time and labor. The way I
see it, if you have the saw you’re likely able to
fabricate on some level and almost certainly have
the skills to figure out anything on this machine,
it’s a very simple setup. All due respect of course,
there is certainly a time saving aspect of following
someone’s advise or mimicking a design but IMO it’s
just simply not worth paying for. Thanks for
everything you guys do and I hope everything works
out in the best possible way for everyone.?
