I do not and will not use Facebook.? Someone else will have to do that if it's how the group decides to go. I have been told by several people that the Facebook format is not good for a group like ours. It works better for current events and idle chitchat, but is difficult to find older info in. I don't know that from personal experience, however.

Bill in OKC

William R. Meyers, MSgt, USAF(Ret.)

A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
LAZARUS LONG (Robert A. Heinlein)

On Friday, December 18, 2020, 08:21:24 AM CST, WHEELER GREEN <sparco505@...> wrote:

How about starting the group in Facebook??

Sent via the Samsung Galaxy S7 edge, an AT&T 4G LTE smartphone

-------- Original message --------

From: Zachary McAtee <zmmcatee@...>

Date: 12/18/20 8:59 AM (GMT-05:00)

To: [email protected]

Subject: Re: [4x6bandsaw] What Should We Do About Group Storage?

Maybe google drive for photos and docs would be an option... linked, stickied, granted authority for anyone to alter/add/remove. 15g free I believe. I appreciate everyone here who is contributing and managing this group, it’s an excellent resource albeit for a very cheap machine that is owned generally by people who can’t afford a better one that wouldn’t need mods and alterations, myself included. If I have to pay on this group I likely won’t stay, it’s antithetical to the whole reason I joined to start. I needed a meta cutting bandsaw and couldn’t afford a more quality piece so I bought the hf version and immediately needed to make some mods which were all essentially time and labor. The way I see it, if you have the saw you’re likely able to fabricate on some level and almost certainly have the skills to figure out anything on this machine, it’s a very simple setup. All due respect of course, there is certainly a time saving aspect of following someone’s advise or mimicking a design but IMO it’s just simply not worth paying for. Thanks for everything you guys do and I hope everything works out in the best possible way for everyone.?