Re: Issue with Shuttle Jog
Gene, thanks for your reply but you did not answer about my issue. Please read careful Thanks ? ? 73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
????? *** ????? *?? GSM? +39 328 7110193? * ????? ???? SMS? +39 328 7110193 ?? ????? *** ? ? If you turn it all the way either way it will tune rapidly if you turn it slightly it will tune slower hope this helps this is what mine does anyway? ?
toggle quoted message
Show quoted text
On Sun, Dec 31, 2023, 12:07 PM Vincenzo Mone < vimone@...> wrote: Hello to All, HNY to everyone. Please I have an issues with my Yaesu FT-920. If I try to decrease the VFO using the Shuttle Jog ( I mean the inner VFO knob ), the frequency instead to Decrease it increase. I notice if I push the JOG to the left quickly to the end so the issue appears, Viceversa if I just push just a little to the left it decrease correctly and then I can continue to push the JOG till the end it will still work correctly. Honestly I do not know if it is a correct behaviour or it is an issue. Please if it is an issue how to solve it? Thanks for any help that will be really appreciated. ? 73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
????? *** ????? *?? GSM? +39 328 7110193? * ????? ???? SMS? +39 328 7110193 ?? ????? *** ?
|
Re: Issue with Shuttle Jog
Sorry I didn't read it correctly sounds like it has a dirty tuning pot I actually have a complete 920 for parts it has a bad main board I am fixing to list all the parts?
GENE MITCHELL. Kc0mqg
On Sun, Dec 31, 2023, 12:41 PM Vincenzo Mone < vimone@...> wrote: Gene, thanks for your reply but you did not answer about my issue. Please read careful Thanks ? ? 73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
????? *** ????? *?? GSM? +39 328 7110193? * ????? ???? SMS? +39 328 7110193 ?? ????? *** ? ? If you turn it all the way either way it will tune rapidly if you turn it slightly it will tune slower hope this helps this is what mine does anyway? ? On Sun, Dec 31, 2023, 12:07 PM Vincenzo Mone <vimone@...> wrote: Hello to All, HNY to everyone. Please I have an issues with my Yaesu FT-920. If I try to decrease the VFO using the Shuttle Jog ( I mean the inner VFO knob ), the frequency instead to Decrease it increase. I notice if I push the JOG to the left quickly to the end so the issue appears, Viceversa if I just push just a little to the left it decrease correctly and then I can continue to push the JOG till the end it will still work correctly. Honestly I do not know if it is a correct behaviour or it is an issue. Please if it is an issue how to solve it? Thanks for any help that will be really appreciated. ? 73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
????? *** ????? *?? GSM? +39 328 7110193? * ????? ???? SMS? +39 328 7110193 ?? ????? *** ?
|
Re: Issue with Shuttle Jog
Thanks Gene, please can you tell me how to do to clean it or if there is any tutorial on the net? Thanks ? 73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
????? *** ????? *?? GSM? +39 328 7110193? * ????? ???? SMS? +39 328 7110193 ?? ????? *** ? ? Sorry I didn't read it correctly sounds like it has a dirty tuning pot I actually have a complete 920 for parts it has a bad main board I am fixing to list all the parts? ?
toggle quoted message
Show quoted text
On Sun, Dec 31, 2023, 12:41 PM Vincenzo Mone < vimone@...> wrote: Gene, thanks for your reply but you did not answer about my issue. Please read careful Thanks ? ? 73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
????? *** ????? *?? GSM? +39 328 7110193? * ????? ???? SMS? +39 328 7110193 ?? ????? *** ? ? If you turn it all the way either way it will tune rapidly if you turn it slightly it will tune slower hope this helps this is what mine does anyway? ? On Sun, Dec 31, 2023, 12:07 PM Vincenzo Mone <vimone@...> wrote: Hello to All, HNY to everyone. Please I have an issues with my Yaesu FT-920. If I try to decrease the VFO using the Shuttle Jog ( I mean the inner VFO knob ), the frequency instead to Decrease it increase. I notice if I push the JOG to the left quickly to the end so the issue appears, Viceversa if I just push just a little to the left it decrease correctly and then I can continue to push the JOG till the end it will still work correctly. Honestly I do not know if it is a correct behaviour or it is an issue. Please if it is an issue how to solve it? Thanks for any help that will be really appreciated. ? 73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
????? *** ????? *?? GSM? +39 328 7110193? * ????? ???? SMS? +39 328 7110193 ?? ????? *** ?
|
ft 920 nothing being recieved on antenna b and dvr not transmitting recorded message
Hi to all I have just purchased a FT 920, After recording the 4 messages on the DVR it plays back and is audible, but does not go into transmit mode, Also antenna B is like their is no antenna plugged in, Antenna? A works fine, I have done factory reset and full reset removing the underside panel, Any ideas.
kind regards
Vinny
M0TAV
|
Re: ft 920 nothing being recieved on antenna b and dvr not transmitting recorded message
Right sorted out the the playback issue on the DVR, it was just me holding the play button in to long, sending it into monitor mode not play mode
|
Hi all, I'm setting up a FT-920 for FT8 and data signals etc, but just wondering if the 5 pin DIN plug is it a standard DIN plug or mini DIN plug?
Thanks
Robbie ZL3OBI
|
I have a? mint? FT 920 for sale.?I am the original owner and non-smoker.? Has the custom cover--always kept covered. No mods, scratches or blemishes. For sale $725 firm. I am in Gettysburg but can deliver within 75 miles of Gettysburg, PA.? E mail with questions to? K4ZDH@....? ?Price includes a?? Yaesu YM-38?microphone.? Original box as well. We old timers like original boxes! Can send photo of microphone if requested. Photos attached. 73
?
?
|
FT920 no RX audio, no TX Eprom issues ??
Hi just bought a near mint FT920 from a local for ?50 gbp.
of course it'#s faulty.
so lights up, good sign..
no TX,
RX is good using a signal generator but no sound..
speak 'clicks' on switch on and beep is heard, audio IC good.
using the tuner it will try to tune and produce a solid 100w.
tuner won't stop.
done the soft reset,
hard reset.
double and triple checked all plugs, sockets and switches.
a bit of research sways towards the Eprom being corrupt ??
Any ideas ??
thanks..
|
Hi, I have a problem with my tuner, the motors work perfectly but on the 12 and 17 meter bands and occasionally on the 10 meters the tuner doesn't work correctly, I've done all the resets but it doesn't work, what could it be?
Greetings
iz8jfa
?
|
Hello what is the best PC management software for the yaesu ft-920 ?
hamradio deluxe aside... e.g. ftdxrc or similar...
|
FT-920 Menu Setting for WSJT-X
I had to do a master reset on my FT-920. I don't remember what the setting for menus U45 and U46. Been several years since I set the radio up. I set U45 to 0 and U46 to 1700 Hz. That is from my notes and memory. With those setting when the radio was tuned to 50313000 the display reads 50312850. Can anyone using an FT-920 please tell me what setting they are using and if there are any other changes from default they use. Thank you for any assistance.
--
Wes WA5TKU
|
Hi group, I have a problem trying to expand the bands on one 920 rig which had its mainboard replaced but I can't do it. First of all, the mainboard doesn't have the green cable that should be cut between q2510 and r2544 I've marked the space with a blue line inside the red circle. There's only one green cable further down marked with a red arrow, I've tried with this one without success cutting it and entering the code as indicated by the mods that are floating around the web, but the radio only emits one beep instead of two which indicates that the passcode was not confirmed. Is there another method or passcode number of unlocking it?
The radio set to OUTSIDE too in F33 Service menu.
?
Thanks in advance,
?
Pablo
HI8-NPM
|
It's a JA or EU? market control board. You can use it, but you'll need to reprogram it with the NA TX partition table, then do your hardware mods.
Jim WA9Z
?
|
Pablo,
It's a JA market control board.? You can use it, but you'll need to
install NA TX partition table, then do your hardware mod.?
Jim WA9Z
On 10/1/2024 11:28, HI8NPM wrote:
toggle quoted message
Show quoted text
Hi group, I have a problem trying to expand the bands on one
920 rig which had its mainboard replaced but I can't do it.
First of all, the mainboard doesn't have the green cable that
should be cut between q2510 and r2544 I've marked the space with
a blue line inside the red circle. There's only one green cable
further down marked with a red arrow, I've tried with this one
without success cutting it and entering the code as indicated by
the mods that are floating around the web, but the radio only
emits one beep instead of two which indicates that the passcode
was not confirmed. Is there another method or passcode number of
unlocking it?
The radio set to OUTSIDE too in F33 Service menu.
?
Thanks in advance,
?
Pablo
HI8-NPM
|
Hi Jim and thanks for your fast answer, i have the original main board damaged by another problem but it receives well and has the mars mod, I know of an executable file under the old DOS operating system that seems to update the band table in the eprom but I have my doubts about using it. Do you know if the 920 stores this data in one of the 2 external eproms or in the cpu itself (MB90P263), perhaps I could copy its data and rewrite it in this one. Thanks again Jim.
|
I have used the Vertex/Standard att0274.exe and it works fine, with
two prerequisites. No Windows, must be DOS. And no virtual USB
comports. Must be a physical RS-232 com port.? I personally would
use the overwrite included with the .exe utility.? I've only run
into a half dozen or so "export" motherboards over the years, and
never had any problem using the DOS utility to rewrite the table.
Well...maybe a little nervous on the first one!
Jim Wa9Z
On 10/1/2024 15:38, HI8NPM wrote:
toggle quoted message
Show quoted text
Hi Jim and thanks for your fast answer, i have the original
main board damaged by another problem but it receives well and
has the mars mod, I know of an executable file under the old DOS
operating system that seems to update the band table in the
eprom but I have my doubts about using it. Do you know if the
920 stores this data in one of the 2 external eproms or in the
cpu itself (MB90P263), perhaps I could copy its data and rewrite
it in this one. Thanks again Jim.
|
It's been a while...I think the EPROMS hold the bios and digital
filter tables, the market based parameters stored in the cpu eeROM.?
Jim
?
On 10/1/2024 15:38, HI8NPM wrote:
toggle quoted message
Show quoted text
Hi Jim and thanks for your fast answer, i have the original
main board damaged by another problem but it receives well and
has the mars mod, I know of an executable file under the old DOS
operating system that seems to update the band table in the
eprom but I have my doubts about using it. Do you know if the
920 stores this data in one of the 2 external eproms or in the
cpu itself (MB90P263), perhaps I could copy its data and rewrite
it in this one. Thanks again Jim.
|
Ok, I have that executable but unfortunately, I don't have the proper old hardware to run it now, thanks a lot Jim for your generous help. 73 and any news I'll post here.
|
Hello friends,
?
i have a FT-920 which has a Problem with no PLL lock (frequency display is flashing).
I found that the 2nd LO isn't producing any output.
So i checked Q2028, Q2029 and all surrounding components.
Also the crystal X2001 (60,77MHz) was checked with an VNA and looked good.
?
So i have Q2027 (2SK210GR FET) in suspicion. But this component tested good in a cheap multi-function tester...
Where and what could i check next?
?
73
Sebastian
|
ft 920 loss of TX on all Bands
Hello Group, my 920 started losing all tx power after 1-2 hrs use but after a while it would return and the radio would work fine , last night it finally gave up, the radio fires up and receives no problem but no Tx power on any band, i'm assuming i need a pair of new MRF's or has anybody else experienced this.
thanks in advance.
|
Gene Allen Mitchell Kc0mqg
Mark
Sebastian Petters