开云体育

Gene, thanks for your reply but you did not answer about my issue. Please read careful Thanks 73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I.

Sorry I didn't read it correctly sounds like it has a dirty tuning pot I actually have a complete 920 for parts it has a bad main board I am fixing to list all the parts GENE MITCHELL. Kc0mqg

Thanks Gene, please can you tell me how to do to clean it or if there is any tutorial on the net? Thanks 73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I.

Hi to all I have just purchased a FT 920, After recording the 4 messages on the DVR it plays back and is audible, but does not go into transmit mode, Also antenna B is like their is no antenna plugged

Right sorted out the the playback issue on the DVR, it was just me holding the play button in to long, sending it into monitor mode not play mode

Hi all, I'm setting up a FT-920 for FT8 and data signals etc, but just wondering if the 5 pin DIN plug is it a standard DIN plug or mini DIN plug? Thanks Robbie ZL3OBI

I have a mint FT 920 for sale. I am the original owner and non-smoker.? Has the custom cover--always kept covered. No mods, scratches or blemishes. For sale $725 firm. I am in Gettysburg but can

Hi just bought a near mint FT920 from a local for ?50 gbp. of course it'#s faulty. so lights up, good sign.. no TX, RX is good using a signal generator but no sound.. speak 'clicks' on switch on and

Hi, I have a problem with my tuner, the motors work perfectly but on the 12 and 17 meter bands and occasionally on the 10 meters the tuner doesn't work correctly, I've done all the resets but it

> > Hello what is the best PC management software for the yaesu ft-920 ? > > hamradio deluxe aside... e.g. ftdxrc or similar...

I had to do a master reset on my FT-920. I don't remember what the setting for menus U45 and U46. Been several years since I set the radio up. I set U45 to 0 and U46 to 1700 Hz. That is from my notes

Hi group, I have a problem trying to expand the bands on one 920 rig which had its mainboard replaced but I can't do it. First of all, the mainboard doesn't have the green cable that should be cut

It's a JA or EU? market control board. You can use it, but you'll need to reprogram it with the NA TX partition table, then do your hardware mods. Jim WA9Z

Pablo, It's a JA market control board.? You can use it, but you'll need to install NA TX partition table, then do your hardware mod. Jim WA9Z

Hi Jim and thanks for your fast answer, i have the original main board damaged by another problem but it receives well and has the mars mod, I know of an executable file under the old DOS operating

I have used the Vertex/Standard att0274.exe and it works fine, with two prerequisites. No Windows, must be DOS. And no virtual USB comports. Must be a physical RS-232 com port.? I personally would

It's been a while...I think the EPROMS hold the bios and digital filter tables, the market based parameters stored in the cpu eeROM. Jim

Ok, I have that executable but unfortunately, I don't have the proper old hardware to run it now, thanks a lot Jim for your generous help. 73 and any news I'll post here.

Hello friends, i have a FT-920 which has a Problem with no PLL lock (frequency display is flashing). I found that the 2nd LO isn't producing any output. So i checked Q2028, Q2029 and all surrounding

Hello Group, my 920 started losing all tx power after 1-2 hrs use but after a while it would return and the radio would work fine , last night it finally gave up, the radio fires up and receives no