开云体育

Thanks for accepting me to the group. My FT-920 suddenly exhibited a problem upon applying power.? Initially when the power switch was depressed the display would com on, and then flash on and off at

i would check your on off power button first

Thanks, Derek, I may have discovered the problem. When I finally got it on this afternoon, I left it on for 3 hours. When I came back, I turned it off, and could easily turn it back on and the VFO

I am helping an older friend who has had FT-920 transmitter distortion, and so we're looking for initial troubleshooting ideas from those who have experienced this trait in the past.? All suggestions

I am taking the test for the Tech ticket soon. I bought a 920 to listen to until legal. Do you have suggestions about first things first with the 920? Eric~

Hello, Eric.? And congrats on acquiring a very fine rig - - the FT-920.? And more to the point, we wish you good luck in taking the Tech Exam and in getting your ticket.? Do let us know how it all

On the Amplifier I have two RCA connectors named PTT and ALC. I have tried to connect the PTT of the Amplifier to the TX GND of the FT-920 and The PTT of the Amplifier to the EXT ALC of the

Hello all, Wondering if anyone here has experience with programs being able to use CAT control of an FT-920?? I recently acquired one and want to use it for digital modes (among others) and while I

The old FT920 here had worked well with the *DXLabSuites* set of applications, including their CAT app, labeled DXCommander (aka) *Commander*.? ? Pls see below

Thanks for that recommendation. I haven't had time to try out the software, but most of the commentary on the groups link provided seems to be about setting up the serial port configurations which

Hi have a ft 920 since Christmas and have only acquired my foundation license in the last few months wanted to have a look at using Wspr the radio is connected with usb-cat lead which works with n1m

hi i have a problem on the ft-920 sometimes when i turn on the radio it is silent without sound then i turn off and on again and everything returns to normal where could be the problem kind

My new call sign... KO4ZMT? ?Thanks for ALL the help guys!! Eric~

Hi I have a problem on the ft-920 sometimes when I turn on the radio, it is silent without sound, turned off and turning back again and everything comes back to normal where it could be the

Francesco, and the group - I also have a strange action when I turn on my FT-920. More times than not, the frequency display will just flash on and off. But I have also had it come on normally with

hello my problem is just ignition, sometimes I turn on and the radio remains silent, no sound is heard and it does not work in transmission, I turn off and turn on and everything has been working for

Hello Folks, I hope in an help. I am using the FT-920 with a KAM Kantronics TNC from a while for digital signals. Today I have noticed a strange behaviour, when the KAM goes in TX the

Hi All, Please apologize for the stupid question. I own a Yaesu FT-920 and an Amplifier RM BLA-350. On the back of the Amplifier I have two RCA connectors named ALC and PTT I would like know which

Are you using VOX to key the radio instead of PTT? Mike

Could be the AF-DSP board. Had a similar problem til the DSP board completely failed. Luckily I found a parts radio and my 920 is back on the air. Mike KA2FIR