开云体育

  1. Yaesuft301d
  2. Topics

looking for parts. FT301s analog face plate and PB1433 rf board

 

I am looking for a analog ft301s face plate and a PB 1433? RF board?

Thanks, Robert KH2BR
 

开云体育

Hi Robert,

Are you sure that you have an issue with your RF board?

Mike

On Oct 26, 2022, at 4:05 PM, Robert Holsti <kh2br.w6@...> wrote:

?

I am looking for a analog ft301s face plate and a PB 1433? RF board?

Thanks, Robert KH2BR
 

i swapped it out with a good one and the good one makes the receiver work.
I have 2 mosfets on the way. I swapped out one mosfet that had a socket to mount it in and that didnt work. the other one is soldered in and didnt want to replace that one until new ones arrive.? This radio has multiple problems and I like the pain !!!? :)
 

开云体育

Was it no TX or no RX or both?


On Oct 27, 2022, at 5:39 PM, Robert Holsti <kh2br.w6@...> wrote:

?i swapped it out with a good one and the good one makes the receiver work.
I have 2 mosfets on the way. I swapped out one mosfet that had a socket to mount it in and that didnt work. the other one is soldered in and didnt want to replace that one until new ones arrive.? This radio has multiple problems and I like the pain !!!? :)

 

It was no rx.. didnot test tx
 

I replaced the receiver mixer and receiver amp mosfets and now the receiver section works. for tx, there is 240 mv of rf output. input to q105 is 95mv. have to check the protection circuit now. SN7400 and Q106
 

Are you still looking for parts?
--
Dave Bohlen

1 - 7 of 7