开云体育

  1. Yaesuft301d
  2. Messages
Single Messages Topics Expanded Polls

Re: Ft-301ad blinking s-meter no transmit

 

开云体育

Disconnect the K1 and K2 terminals from everything else. Put an ohmmeter across those terminals and carefully isolate the LPF Board from everything else in the radio (use a piece of cardboard as a spacer/insulator). Power up the rig and watch the ohmmeter. It should read 0 ohms or close to it if the relay is pulling in properly.?

Let us know what you find.?

73 - Fred, N8YX?


-------- Original message --------
From: KI7WQH Steve <sdandrus@...>
Date: 5/5/20 10:03 AM (GMT-05:00)
To: sdandrus@..., [email protected]
Subject: Re: [yaesuft301d] Ft-301ad blinking s-meter no transmit

OK, it was actually easier than I thought. Now that I have access to the rear of this board, is there an easy way to test the relay? I feel like testing the relay will be way easier than testing the thyristor?with my knowledge level and equipment, but I'm here to learn.

Join [email protected] to automatically receive all group messages.