开云体育

On your RF port (AGWPE or Serial_TNC), which digipeat aliases did you choose to be used on that port? Digipeating doesn't happen automatically on every RF port; it has to be configured on a port-by-port basis. For example, you wouldn't want everything coming in from 2 meters with a WIDE2-2 path to be dumped to an HF port at 300 baud.

The Digipeat tab is control across all of YAAC, but you also have to set up digipeating on each RF port individually, to properly handle cross-band digipeating and related services.

Hope this helps.

Andrew, KA2DDO
author of YAAC

________________________________________
From: [email protected] <[email protected]> on behalf of Ian Morrison <Ianm3920@...>
Sent: Friday, December 8, 2023 11:28 AM
To: [email protected]
Subject: [yaac-users] YAAC wont digipeat

I must have changed something, but I don't know what.

The following is set under the digipeat tab:
ALIAS ??????WIDE 1-1 checked
????????????WIDE 2-2 checked

SELECTED DIGIPEAT PATHS?WIDE2-2

All else blank.

The systems is working fine tracking my car, reporting weather, sending beacons and status.

Thanks ,
VE3EP?Ian


________________________________
From: [email protected] <[email protected]> on behalf of Rusty Travis <rusytravis19@...>
Sent: December 5, 2023 2:31 PM
To: [email protected] <[email protected]>
Subject: Re: [yaac-users] YAAC won't run on RPi

Error messages can sometimes be rather arcane, but they are always indicative of the problem.

On 12/4/23 21:20, Michael WA7SKG wrote:
...
My apologies if you found this somehow distressing and ask forgiveness that this old man with rapidly slipping memory has not achieved your apparent higher level of enlightenment.

开云体育

开云体育