开云体育

I found the demo quite good.

Nothing new. News of this patch editor has been posted several times, here and other places.

envia94 wrote: Wow, random patches for my Xpander! I'll pay $15 for this if only a donation. Jeremy.

BTW synthwise is a scrapper. They get most of their posts scraping my site but you'll never get the video, links and full post there. Just look for it on

Hi, Please, take a look at the link named 'Xplorer' in http://launch.groups.yahoo.com/group/xpantastic/links/ It is really Xiting news and a very good web page too! Cheers, Tiitu.

Here you go: http://matrixsynth.blogspot.com/search?q=Xplorer+-+Oberheim+Xpander+Software+Editor -- cheers, matrix http://matrixsynth.blogspot.com

This is exiting: http://synthwise.com/xplorer-oberheim-xpander-software-editor/2010/06/02 Tiitu

Congrats ! For me, thats weird cause I contacted him too because of the switches after reading the message below and got no reply :-( Im not sure about the encoders but Im intersted too. PeWe Am

Thank You! I just received some switches from Doug. Nice and easy transaction! Now all I need is a replacement encoder and I will have a 100% working Matrix-12!

would ALPS part # STEC16B04 work to replace the encoders? Looks like they are about $2.50 USD each from

Hi, You can try to contact Doug at KICS USA (kicsusa @ aol dot com), he still had some switches 2 years ago, I was able to order some from him in... 2007. See my message about

Well,- Im searchin ... Original is Marquardt Switch 6401 which seems to be a discontinued part. I measured my original switches and what eventually comes close most or will fit is the actual

Looks like I also need to buy new switches for my Matrix 12, a few of the buttons are completely dead and attempts to clean them are not working. The little removable rubber membranes inside are

This is NOT my project, I'm just forwarding the link to get some discussion going. http://midibox.org/forums/topic/12863-mios-project-oberheim-m1000-xpander-pcb-traces-uploaded/

Is the ALPS Rotary in the files section an available replacement which is guaranteed to work in a Xpander or is it the original and not available ? PeWe Am 13.07.2010 22:37, schrieb

Thanks! somehow I missed that when I first looked.

have a look here : http://launch.groups.yahoo.com/group/xpantastic/files/Documents/ 2010/7/12 mirror_saw7778 <haven1@...>

My Matrix-12 needs a replacement rotary encoder does anyone have a part number so I can order some? I tried searching through the messages on this group but can't seem to find any part numbers,

Hi I have replaced the scans I uploladed last week in JPG format by PDF files passed trough OCR: they take less space. The 1987 files are the back side only of the flyer: the front side was a color

Thank you Greg... I will look at that. Actually, I would like to create a clone of the Xpander user interface, but I like the idea of the MidiBox modules..