开云体育

Hi Jeremy, Is it on all voices, or the stereo outs?? If it's the stereo outs, there is a?TLO72 opamp ( U1) which drives the output ?jacks. You could try replacing this. It's in a socket so it's

Tony Cappellini wrote: Count me in! Thanks, Jeremy.

Here's something that may be interesting to some. Someone who is good at patching, come up with a great bass patch (and some others), and record a few notes of that patch. Upload the patch, notes

I buyed my Xpander new mid 80th, never a CEM 3374 failed,- but I buyed 1 pc as a replacement if it will ever happen. CEM 3372 is easier to blow because the signal created by the OSC (CEM 3374) goes

envia94 wrote: I have a question which can anyone answer? My Xpander shows all tuning tests as 'SUCCESS', no failures. But the voices sound a bit 'parpy' and tinny. Is it possible for tuning to

There is sometimes one CEM3374 or so for sale at www.ebay.com, www.ebay.co.uk, or www.ebay.de. In an extremely desperate situation, you may also try to ask me again.

Hi everyone there! Thanx for all your comments and support! I'm going on the way of recapping...anyway if on of us hear about some CEM3374 available let me know! I'll stay tuned. Bye PS: I love my

Hi, Please, you can contact Doug directly in his email address. But, be aware that a CEM3374 is one of the most rare vintage synth chips! Therefore, you should buy them as many as you can afford or

Hello! Excuse my bad english i'm french. I've got an xpander witch 3374 of voice N°6 needs to get replace cos tuning fails... all 3372 have already been replaced. I think for a better result i should

Hi, I have a few CEM3374s and CEM3372s for your Xpander/Matrix-12 in stock now. All chips are tested and guaranteed working. Thanks, Doug synthparts.com

It is possible, and easy todo: Let's take the cutoff example: - first send a page/subpage select to say to the xpander you want to edit a parameter from this page. F0 10 02 0B 22 00 F7 // Page and

Do you mean a single value- such as Osc Freq, or Filter cutoff? I can't do this from work- but you can easily do this yourself. Get the free program such as Midiox (Windows Only). If you're on a

Does anyone know if it is possible to change a single parameter value on the Xpander via sysex? If yes, I would appreciate an example string. Thanks! James R. Coplin

Well, its good idea, but I never had probs to edit my gear from their surfaces UI, so also not the Xpander. In the end, much of success will depend on how effective a software editor is in a DAW

Thanks and good luck with the development. In my opinion this is one of the best ideas related to Xpander! Cheers, Tiitu.

Hi, I'm the guy behind Xplorer. I don't make too much buzz on it since I have a very few free time to work on. As you can see the main features are implemented, but I do not want to release an

Three Cheers for?PeWe !!!? Man, thanks much for figuring all this out. I know it's been a major PIA for many of us. Best Regards Karl Schmeer ? ________________________________ To:

For everyone here in the group: Today, we soldered a sample of: Marquardt Switch 6425.1101 into my Xpander. Its 100% pin and form factor compatible and fits perfectly

Would love to have this for my Xpander... Is anyone on here in contact with the maker and do they have any idea when there might be a release?? even a buggy non finished one I'd be happy with.

... I have been away for quite some time, but I only find this discussion about editors for Xpander: http://launch.groups.yahoo.com/group/xpantastic/message/172 Tiitu