开云体育

Walt Whitney is also selling cheap patches on cassette and he was a great programmer back in the 80s. I've got some Chroma patches of his that are pretty good. My only experience with Kid Nepro is

Hello list, The venerable Kid Nepro is still selling his (her?) Xpander/Matrix 12 patches via eBay[1] - 100 patches for (as little as) $20, that's just 20? per patch. Has anyone tried these patches?

:) -omar --- sent from iPhone

hi Omar, many thanks! now the 'lever 2' works fine! best regards,Bakis. ? To: "xpantastic@..." <xpantastic@...> Sent: Sunday, July 5, 2015 7:53 PM Subject: Re: [xpantastic]

Bakis - if you haven't already checked, look to see that the Xpander is set to receive "modulation" for Lever 2 on MIDI CC 1, which is the standard CC for tx/rx modulation from an external controller.

hi to all, few days ago, i (my tech actually) restored my xpander with changing the battery, changing all capacitors, in the voice boards and in the PSU. now the xpander, after the autotune, it passes

Hello?You may have tried this already,? but if you re-seat ( carefully pull out and push back in) the?integrated circuits in the digital section your problem may go away. ?Best Luck?Karl

I just got a non-working Xpander (that seems to be a Rev. A U.S. made one). After a power supply recap and full cleanup- I'm getting a "Voice Processor Malfunction" warning. FYI- the U.S. made on uses

Ok, thanks Karl. I'll just replace the electrolytics.

Thanx Tony the pictures help. You are right these are the caps I would leave alone. Polypropylene ( I called them polyprop for short) are one of the few capacitors to have no temperature drift. They

Thanks for the info Karl. That battery is the exact same one in my Xpander currently. Looking at the attached picture of my voice board Regarding the polyprop caps- when people recap their voice

Hi Tony, Here is a link to the battery: http://www.digikey.com/product-search/en/battery-products/batteries-non-rechargeable-primary/394467?k=P226-ND All electrolytics will wear out with age. However

Happy New Year Xpander/M12 owners, For the sake of prevention, I want to replace the battery in my Xpander, as well as the caps on the power supply board. At the moment, the battery looks clean, no

I had this problem a few years ago, the only solution was filing the edges of the button holes which worked well.

Thanks all so much for the ideas. I tryed a few things. Reseating the board didn't work because the PCBs screw holes are actually very tight and don't allow for enough movement. I took a razor to the

I'm interested too. I did find some parts that looked identical but the mounting is different as the manufacturer improved the design.

Here's a link to the buttons: http://syntaur.com/Items/2847.html Seth xpantastic@...> wrote:

Contact Clavia, their Nord synthesizers use similar looking buttons, albeit smaller. ?I'm sure the same manufacturer makes the bigger Xpander/M-12 button keytops. ? I did see those online a little

Great news! Thank you guys! Tiitu

Yes ! Thats the right ones !!! I replaced all in my XPander. merry x-mas too PeWe Am 20.12.2014 um 15:27 schrieb geebeex@... [xpantastic]: