Re: encoders for the Japanese Matrix-12?
|
I¡¯m not sure if I posted here but this year I finally found a suitable replacement for the encoders in Bourn¡¯s encoders PEC09-2325K-N0015.? Digikey is the only place in the US I¡¯ve found that stocks them.? I¡¯m not sure what if any difference there is in the Japanese and American Xpanders as far as the encoders.? The Bourn¡¯s are not an exact drop in replacement as they have a different physical footprint. ?I used some rubber washers to center them in the mounting hole and had to use some wire to extend from the solder lugs to reach the board.? Not a big deal at all ¨C it took me less than an hour to replace all of the encoders on mine. ?They are also cheap.? I bought two full spare sets to have on hand for future repairs if needed. ? James R. Coplin ?
toggle quoted message
Show quoted text
From: xpantastic@... [mailto:xpantastic@...] On Behalf Of Haven Siguenza
Sent: Monday, August 08, 2011 11:29 AM
To: xpantastic@...
Subject: [xpantastic] encoders for the Japanese Matrix-12?? ? Anyone know where/what equivalent encoders for the Japanese made Matrix-12 are available? I have a Japanese made Matrix-12 that has sat unused for almost a year. It is missing a single encoder and some buttons have failed. I managed to find some replacement buttons for the American M12 but they are slightly different from the Japanese version which means some wiring needs to be done. At this point if I can't find parts soon I will have to sell at a loss. Any help is appreciated.
|
