Hi Matt,
The mod matrix page is accessed through the "Misc" page, correct? So the
implementation is based on hardware that already exists on the Xpander i.e. you
wouldn't be giving up any other buttons.
Yep
So the big question is: would the mod matrix become available if you used M12
roms in the Xpander? Has anyone tried? I too could easily give up the cv/gate
ins...
AFAIK?it has never been tried before. I would want to take a long serious look
at the schematics and hardware
for each synth before I would even try it.
Best
Karl?
________________________________
From: vrazomatt <vrazomatt@...>
To: xpantastic@...
Sent: Fri, August 5, 2011 10:17:15 AM
Subject: [xpantastic] Re: Why no Xpander mod. matrix implementation?
--- In xpantastic@..., Karl Schmeer <shire03@...> wrote:
Hi Matt,
I should have been more clear. I am assuming the digital boards of both the
Xpander and the M12 are the same.
I really don't know if they are, but if so, it would seem you could take a set
of coppied ROMs from an M12 and put them into an Xpander.?? Giving the Xpander
the Modulation list page. However since the M12 roms never supported?
the 6 CV/gate ??inputs they would not exsist to the firmware.
On th M12, the modulation??page gives you a list of all 20 modulation routings.
You can change the amount or the destination. I??find it most useful to delete
unused ones when I need more for some reason.??
But there is a bug. If you access the modulation page, for some reason it turns
off??any quantization??you may have set up.
Best Regards
Karl
________________________________
From: vrazomatt <vrazomatt@...>
To: xpantastic@...
Sent: Thu, August 4, 2011 10:56:27 AM
Subject: [xpantastic] Re: Why no Xpander mod. matrix implementation?
Karl,
I presume you are talking about the 6 cv/gate inputs (not the CV pedal inputs,
which I assume the M12 has as well)? If so, there is no direct
CV-as-mod-source
ability now, so I'm not sure why this would have to be addressed in the
mod-matrix?
From my understanding, the mod matrix is just a compendium of all mod
routings,
addressed though the already existing "misc" page, so no additional coding
would
be necessary.
Anyways, I guess this is all just academic unless someone feels like writing
something up!:)
Am 04.08.2011 08:59, schrieb Karl Schmeer:
So if even if someone copied
the ROMs from an M12 and was successful in getting it to work in an
Xpander. you would still lose the
code to control the CV inputs.
Best Regards
Karl
