Re: How to make snappy bass on Xpander ?
|
PeWe
>>Components and software inside Xpander(M12 are as fast as they are
and you cannot make ?em faste.
>>Use the machine for what it can do excellent and use other gear
for the tasks where Xpander/M12 fail.
Welllllll, Hitachi makes a pin & instruction compatible 6809 replacement (6309) that runs at 4MHZ, but it would require a partial rewrite of the firmware. (I'm not sure if it is the exact same model as the 6809 (B vs E) though).
Additionally, there is another mode in the 6309 that has a few "extra" instructions which enable some operations to be even faster. But this would cause more of an incompatibility until the FW is re-written.
However, if any of you are tired of the Xpander/M12's current limitations, a challenge awaits ye.... ;-)
On Mon, Mar 31, 2014 at 11:41 PM, PeWe <ha-pewe@...> wrote:
?
That?s why I said "fuget it" ...
Components and software inside Xpander(M12 are as fast as they are
and you cannot make ?em faster.
Use the machine for what it can do excellent and use other gear
for the tasks where Xpander/M12 fail.
Am 31.03.2014 22:59, schrieb leo-666@...:
?
But I heard that the xpander's processor acts quicker if
less routings are enabled.
It's logical cause the processor is so vintage.
I even saw somebody wrote that applying one envelope a
several times to the same destenation helps.
But I tried this and did not noticed a quicker responce.
|
