Yes you can try to only swap the, but he said previously that the board is producing sounds. So, the cable may be ok.
Envoy¨¦ de mon iPhone
Le 10 juil. 2012 ¨¤ 16:12, Omar Torres <
holografique@...> a ¨¦crit?:
?
Ok.
so if this "ID" is set with the strap/cable,
have tried just moving the cable? If moving?
the cable changes the "path" then again its
not your boards and you just have a bad cable! :)
?
It has to be two boards, or the error message stops the machine.
Terje
Den 10. juli. 2012 kl. 14.45 skrev Christophe JANOT:
?
Try with only the other board.
Envoy¨¦ de mon iPhone
? The Matrix-12 is smarter than us:
I tried to start with only one voice card connected, but was given an error message, and no sound comes out.
Terje
Den 10. juli. 2012 kl. 13.53 skrev Omar Torres:
?
?im not convinced yet you have a bad voiceboard
can the Matrix-12 boot and run with only one?
voice-card connected? If so, try each board
individually and see what your results are.
?
Can you send me picture of the top right part of each of the voice board ? I want to see if they do not share the same ID. Here is the reason :
Each voice board had his own id. This id is set with a strap. So when you swap the board, you didn't swap anything since each board kept his previous ID.?
Dang! That means that there is something wrong with the voice card.
OK, thanks, closer to the problem now.
