back to earth - when will your CW decoder will work again? To me it is essential. I am only in CW on air. You did a nice programming at all. Please take a look on the CW decoding section. Thank you so much.
On Sun, Feb 4, 2024 at 11:00 PM, Raimund Reh wrote:
back to earth - when will your CW decoder will work again?
It works. But I’ll do it even better especially for you in the next version. The next version will be the last. I've started working on my own DDC/DUC transceiver and don't want to waste any more time on the X6100.
If Morse decoding is essential, you should maybe consider paying for a commercial Morse decoder. There is also a very good Android app Morse Expert, and it's free. I assume Oleg is developing his X6100 fw on his spare time.
Sorry to hear, but THANK YOU VERY MUCH OLEG, for all the effort you have put inte the firmware this far. Any more info on your new project? 73 de SA5QED
On Mon, Feb 5, 2024 at 03:25 PM, SA5QED/David wrote:
Any more info on your new project?
QRP, DDC/DUC. ADC 16 bit, DAC 14 bit. LCD 5", case size 190x120x40mm. The work is in full swing. The electronics engineer completes the circuit and layout of the main board. There is a design for the case. I'm writing firmware on a development board.
On Mon, Feb 5, 2024, 4:42?AM Oleg - R1CBU <belousov.oleg@...> wrote:
On Sun, Feb 4, 2024 at 11:00 PM, Raimund Reh wrote:
back to earth - when will your CW decoder will work again?
It works. But I’ll do it even better especially for you in the next version. The next version will be the last. I've started working on my own DDC/DUC transceiver and don't want to waste any more time on the X6100.
I'd like to add my thanks to you Oleg for all of your hard work in turning the x6100 from a good machine into a great machine!? I like your firmware a lot more than the stock, and it works great for me.? No complaints and MANY THANKS!!!
On Mon, Feb 5, 2024 at 03:25 PM, SA5QED/David wrote: Any more info on your new project? QRP, DDC/DUC. ADC 16 bit, DAC 14 bit. LCD 5", case size 190x120x40mm. The work is in full swing. The electronics engineer completes the circuit and layout of the main board. There is a design for the case. I'm writing firmware on a development board.
On Mon, Feb 5, 2024 at 10:58 PM, Gregory Majewski wrote:
Please let us know when more details on it are available and how to order/pre-order one. I know the firmware will be good.
Now it’s difficult to say when it will be ready. Hardware development is progressing very quickly, and the firmware is 90% ready. Let's see how things go further
On Mon, Feb 5, 2024 at 10:58 PM, Gregory Majewski wrote: Please let us know when more details on it are available and how to order/pre-order one. I know the firmware will be good. Now it’s difficult to say when it will be ready. Hardware development is progressing very quickly, and the firmware is 90% ready. Let's see how things go further
i'm noob to the 6100, and have had no trouble getting it all set up with latest version of the xiegu FW. yes the decoder isnt perfect, but most arent, so its just best to rely on the decoder between our ears IMHO. -- 72's de k8zf, randy
Raimund Reh
SA5QED/David
Dj Merrill