开云体育

I'm in the middle of a fairly large city, and the BCI filter is essential. Of course you can say goodbye to 160 meters. For me though, the reception problem was a combo of BCI and the BASE app. With

I guess, it might be due to overloading radio input with a strong AM stations. You can try to use a BCI filter. For example - this /g/xiegu-x6100/topic/k9dp_qrp_bci_filter/102162571

I'm working on the GUI part. Hope will publish both (GUI and patched BASE) in a few days. -- Georgy // R2RFE

Yes, Rainer — ATT (!) has to be ON (!) If PRE preamplifier is on, then I don’t hear any signals (!!!!!!) 73, Randy K7RAN

Hello, thanks for your thoughts. It was just the solder joints that came loose — the socket is intact. What had me worried was that resistor. Now I’ll try it with a 1k ohm and see how it goes.

… apologies, I forgot to post the link :/ 3.5 mm Audio Jack Connector PCB Mount Female Socket 6 Pin PJ-311D/PJ-342B 5pcs ebay.us

I did exactly the same to mine but didn’t manage to break the resistor but I did manage to break the socket and some of the track. If you need a replacement the eBay link below is an almost exact

Thank you for your help! It’s not an exact match, but I’ll try using a slightly larger 1 kΩ SMD resistor and see how it goes. ?

My device ist currently open. I measured 1 kohm. Am 10. Mai 2025 01:46:58 MESZ schrieb "mega.teknik48 via groups.io" <mega.teknik48@...>:

Mean you ATT or PRE? Am 10. Mai 2025 07:56:25 MESZ schrieb "Randy K7RAN via groups.io" <k7ran@...>:

Ok, maybe this is an epidemic! I didn't have problems before, and I don't think I've ever changed the app or base... My *APP is 1.1.8* — and my *BASE is 1.1.7*... *And suddenly my receive is almost

I was wondering if anyone else in this group will be at the Dayton Hamvention next week. If anyone is interested, we could get together to talk all things X6100 for half an hour Friday or Saturday -

I accidentally dropped the device while an external speaker was connected, and the speaker jack broke. Along with the jack, a capacitor and what I believe is an SMD resistor behind it also got

Is this a new patch or release?? Where might I find it to check it out?

https://www.youtube.com/watch?v=AzkjCKjF6bI

Where is the setting for split mode?

Hi. I added some controls for compressor (threshold, makeup gain offset), also - control of output signal level. Hope last will solve issue with no output power (actually - very low output power), but

Hi Georgy! How’s the work going on releasing the patched version of base? I recently browsed the code in your x6100_base_path repo and was wondering if there might be a way to play around with

Actually figured out my own problem once I was more awake. The radio got put into split mode. So now I know what that looks like. I'm leaving this open and not deleting it in case anyone else who's

I just bought a x6100 to upgrade from the truSDX I had been using. I'm noticing when I transmit, either with Winlink or JS8Call, it's flipping over from A, where I am on the right frequency, to B