开云体育

Werden die beiden Eintr?ge angezeigt? Ist keinerlei Empfang da, auch nicht der Wasserfall zu sehen ? Geht senden ? Am 5. Mai 2025 20:51:52 MESZ schrieb "Adrian EI9HAB via groups.io"

In my experience, sometimes the UI board boots up, but the radio board doesn't. When you turn on the radio, press and hold the power button for a long second. You will usually hear 2 clicks as both

Vielen Dank Rainer, ich probiere es! 73 Adrian

.fr-emoticon.fr-emoticon-img { background-repeat: no-repeat !important; font-size:

This Display must show two entries. One for the Baseband-Unit and one for the Display-Unit. Make a new Update from the SD-Card Am 5. Mai 2025 15:29:06 MESZ schrieb "Adrian EI9HAB via groups.io"

Hi All Just got one today. Have run into an immediate no receive issue. Have tried multiple antennas with no success. I haven't attempted Tx. Is there a thread on here about trouble shooting this? I

Thanks Geogy [email protected]> wrote:

Hi. I didn't publish it - need to solve some issues. -- Georgy // R2RFE

Hi Georgy Which file did you "bake" the adaptive notch filter into? Was it a v1.1.6/v1.1.8 base file or v2.9.2. I am not sure which one I should load to get this feature. Many

Just baked firmware with an adaptive notch filter - https://www.youtube.com/watch?v=CXx8Xo7va10 I should check and, perhaps, tune some parameters, but seems it works. Just not sure, how to make it

Thanks wicknix! I copied Georgy's newest modified BASE 1.1.6 over to /usr/firmware and "downgraded". Things are working better now. You guys are good.

Glad to help, and it’s good to know that you also gained improved RX by using BASE 1.1.6.

@wicknix - Thanks for the help! With the 1.1.6 BASE, my s-unit “comparison” seems much closer between the x6100 and the g90 now.? I'm actually starting to think that this was probably an

@John - What i did was installed Xiegu’s latest 1.1.8/1.1.9, then i downloaded Georgy’s original modified 1.1.6 base (

I have two x6100s. Regardless of whether I use PRE/ATT, the difference between the devices is always 2-3 S-levels. The RF gain is 100 on both devices. The firmware is also the same. Unfortunately, I

@wicknix - So, to mix versions, would one install an older version, say APP-1.1.7 / BASE-1.1.6, boot the radio, use the OS to flash the older baseband and then just go back an install the newer

I noticed RX was lower on BASE 1.1.7 and BASE 1.1.8 also, which is why i prefer base 1.1.6 (and because 1.1.6’s NR is superior compared to other versions). It RX’s so well i have to turn the RF

Double checked RF Gain and it is at 100, which is where I always run it (which I thought was odd).? I was running App 1.1.9/ Base 1.1.8 when I noticed issues, but also tried App 1.1.8/Base 1.1.7 to

If you BASE firmware is 1.1.7 or 1.1.8 you should set RFG to 100 (not 63). You can check BASE firmware version under system settings -> system info menu. -- Georgy // R2RFE

Have you reinstalled the firmware? I have the same problem but my SD card slot is broken so I can't reinstall the firmware. I looked at the board but couldn't find any hardware errors.