开云体育

Thanks for the replies. I will set it up with R1CBU and go with that. Thanks again! 73

Hi. New version of the modified BASE firmware with FM squelch - https://github.com/gdyuldin/x6100_base_patch/tree/1.1.6/firmwares This time I decided to push 2 versions - with *r2* suffix and with

With OEM firmware you can try to fix it with replacing within /etc/init.d/S51amixer amixer -c 0 sset 'Mic1 Boost',0 0 1> /dev/null with amixer -c 0 sset 'Mic1 Boost',0 1 1> /dev/null This enables mic

This is one of the features that are buggy in stock firmware. That's why I've moved to R1CBU/R2RFE firmware, where this message recording works like a charm.

Agreed. That will not work. Your x6100 has to be in the same IP range as your router. I highlighted the error in bold in my quote above. Your x6100 might be able use 192.168. *1*.18 if nothing else on

Been trying to record a message. It records, but cannot hear on play. Latest firmware from Xiegu installed. Anyone else having a problem?

I've tried the DHCP method. It doesn't work for me.

Thanks Christian, that is what I used in trying to set it up. The problem is mostly my inexperience in networking? :-(

That could help ? https://www.radioddity.com/blogs/all/how-to-connect-xiegu-x6100-to-wfview-software?srsltid=AfmBOorRESblEKM5mZYNl82vw684YVN288kYXdvaJ5pmqZzviN-eksA7 73s Christian F8GHE

I tried using DHCP and Autoconnect. I think you can't enter the SSID manually - it is entered automatically when you select it from the list of SSIDs and press CONFIG.

Yeah that won't work.? Just use DHCP, autoconnect.? Make sure there are no spaces in the SSID, front, middle or back of the SSID.

Pretty sure that won’t work. You’ve got a class D IP, with different routing requirements. 192.168.5.18 and 192.168.1.4. Unfortunately, we can’t see the netmask in the x6100. If it’s

Here is how I have tried to configure the X6100 in WLAN settings. iolar is the SSID of my WiFi (Eero router). Password is my wifi password. 192.168.5.18 is the X6100 Reserved IP Address I entered into

I am totally confused about the X6100 WLAN SETTING. Should I set it up for my WiFi SSID, or for my X6100 SSID (assuming that is labelled ff07ab)? If the latter do I leave DNS Server box blank?

Thanks Frank. I use Fing, which does the same things. I also use Terminal.

Hi Denis, You may already know this but I use an IP scanner program to see what IPs are active on my LAN segments. I've used several but an open source one that I use often is AngryIP, available

I have tried setting my router to 2.4GHz only, but that is not the problem. In the x6100 WLAN Setting, should I see the X6100, and how is it labelled?? Is it likely to be ff07ab? I only see that and

Yes the IP Address I entered is within the range. Ping is ok with all devices except the omne in question. arp -a shows the device as (192.168.5.18) at <incomplete> on wlp4s0 But so do several other

2 or 3 times I saw no power output on AM - first press - power increases, than decreases, next press - no power. I guess, it's due to ALC working - switching to another mode and back to AM restores

WFview works best with an ethernet connection. Use a USB-ethernet adapter (any c-type that say they work with Linux/Raspberry Pi) and then look for that listing on your router. Works like a champ for