开云体育

I have a Lenovo X1 Micro with only USB C ports.? The only thing I've found to work (after trying Amazon's and Grok's recommendations for USBC to C data cables), is to use a good USBC to USBA cable,

Where are screenshots stored? Looked all over using MC (thanks!) and can't find a folder with the shots. I assume it's in usr somewhere ...

Hi Georgy. Unfortunately that is not it apparently. I had already changed that to bright red. I thought the same thing. I don't use CW so i'm not exactly sure what marker he means. If it's the marker

I saw those but it didn't help. I even downloaded the CHA drivers but when I try to install it shows 'already installed'.

Pulled the new build - works great - thanks again wicknix!

In the firmware for TRX Brass I enabled the console directly on /dev/fb and with the help of a USB keyboard, SSH is not needed (; 73!

X6100 uses ALC to protect output transistor from overloading/high SWR. Few times, when my antenna accidentally wasn't connected properly and I tried to transmit - I seen SWR ~ 40 on the display of my

I guess you looking for this line: https://github.com/gdyuldin/x6100_gui/blob/main/src/waterfall.c#L82 BTW, it will be great if you would be able to create a configurable parameter for such color

Richard, Oleg implemented the 2m and 70am feature for those who have an external transverter /g/xiegu-x6100/topic/102861343 The hardware in the X6100 covers only HF/50MHz. Franco

I installed the wicknix build of R1CBU (thank you both!) and noticed that the radio will happily tune up to the 2m and 70 cm bands.? Does the radio support that internally?? I cannot hear anything

I can try. I'll keep poking around the source code and see if i can spot it. No promises though.

x6100 latest Xiegu firmware installed. * If you have high SWR, and auto-tune - does the radio protect itself from transmitting/tuning with too much reflected power? ?How far out does the SWR need to

...looks nice so far ! Please could You make the color for the frequency-marker in CW in a very contrasting color ... ? Thanks / 73 , Jens Sent: Sunday, March 23, 2025 8:39 PM To:

I think it might come down to SD card brands? I find my sandisk branded cards at times need to be written to twice to actually work. Random other misc brand cards work the first time. Anyway, thanks,

If you have the chance to try it with Linux (or know a friend who runs Linux and try to connect to the dev port), we can try to rule out Windows vs the hardware (USB cables, X6100 USB connector,

Wouldn't load at first. Downloaded latest Balena and imaged with no problem. ( Outdated Balena)? Anyway, can't wait for the bands to get better to really try it out. From what I see on the waterfall,

As mentioned, you need to use the cable that came with the radio connected to the DEV port. Also in my experience win10/11 are problematic as they seem to keep silently replacing the installed driver

No issues. Rebuilt my color mod sdcard.img with it. Thanks!

Ok, since buildroot 2025.02 is now available (thanks Franco!), i rebuilt my sdcard.img again using that. In this version i also added Midnight Commander. This makes ssh sessions tons easier. If you

Latest news. Not having any success with cables or software drivers my hope went to a bad solder joint on the USB connector. Wouldn't be the first time. I did open the radio and found no problem with