开云体育

I would say the battery is weak and cannot power the rig.? I am sure the ext power and internal battery supply the same circuitry. If you power up the rig with ext power, turn on the rig and then

Looking for a fix for the x6100.? The radio operates just fine on external power.? However, the radio will not turn on with the internal battery though it is full.? I rarely use the radio so not

There's really no need to copy data around if the SD card was previously already used for R1CBU, since the data is already in the third partition; it is just not mounted because the master boot record

What if you copied files in Data partition, wrote image, then pasted the original data back into the Data partition on newly flashed SD card?

There are no configuration for this (yet). Perhaps, it will be added in one of the next version. Or someone will find a way to fix it in a BASE firmware. -- Georgy // R2RFE

Hello Georgy, could you please be so kind to explain, what I settings I should use? All of the settings for the waterfall are ‘a book with seven seals’ for me anyway. sorry ? 73 de Rico DG5BQ

I described this issue on this topic: /g/xiegu-x6100/topic/wrong_signals_on_the_bound_of/108431112 It can be "fixed" with displaying 80 kHz (instead of 100 kHz). Also, perhaps it

Hi Rico, I am afraid many of us have this problem (including me), the weird false signals are "birdies" - caused by hardware design issues. So it cannot be fixed with a firmware change

Yes , it’s the same here with my X6100. I also don’t know the reason for that ... 73 , Jens Sent: Tuesday, December 31, 2024 12:11 PM To: [email protected] Subject: Re: [xiegu-x6100] R1CBU

Georgy, thank you very much for all the work you put into this project. I'm so happy with my little radio no. However I do have one issue that's annoying me: On the waterfall over spectrum rather it

Since everyone here is just talking about charging the battery... I have another very interesting issue. First I have to admit that I didn't really understand the charging process when I got my x6100

That would work too - I hadn't thought of it. What I did instead was to add a few lines to S01create_data script and use 'blkid' to see if there is a preexisting 'DATA' partition; if there's one I

Franco, regarding dd I assume You mean: dd skip=1 seek=1 with default bs=512 which preserves first SD sector containig partition table?

Thanks Markus for the kind words and for confirming that now FT8 TX works. I just created an SD card image for others who want to try it without having to build everything from scratch. The image is

Georgy, I did not mean to hijack your message thread.? I just wanted to measure the new firmware you provided but ran into a problem and then spun out of control. I will stop posting here and will

Rainer, I can potentially use white noise; my function generator is also an ARB.? I will have to rewrite my test. As of now it is using swept sin. But you said "ALC effects"!? That is something I

Dan, can you test with white noise? This should avoid any suspected resonance or ALC effects, I plan to test the following when I get home from vacation: PC with VA software -> USB -> X6100

After some investigation I have found that there is a time varying gain of some sort from the microphone to the modulation output.? It is worse at lower frequencies but can be seen at all

Franco, i have rebuild the Kernel and was able to make a? FT8 QSO. So i think FT8 works now. Again, thanks for your and all the others Work to make the x6100 better. ? 73 de Markus, DB2ZW

Ah thanks I got you done and working 73 KQ4WGS Nemury Valladares [email protected]> wrote: