开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
Re: R1CBU firmware 0.26.0 #development #firmware #r1cbu #R1CBU-Firmware
Yes an no Plug it in. no configuration.
By Michael Pizzirusso · #6241 ·
Re: R1CBU firmware 0.26.0 #development #firmware #r1cbu #R1CBU-Firmware
Am I right... I can just plug in one of my little usb GPS modules and have the radio set the time from that? ? Do I need to configure anything? -- Stephen AC2GW
By Stephen · #6240 ·
Re: R1CBU firmware 0.26.0 #development #firmware #r1cbu #R1CBU-Firmware
Yes, I use the external GPS, and it is my preferred way (looking forward to use the WiFi option also). Just saying the TimeSync was an added value in some cases, like: - inside a building, or even
By gregorpozar@... · #6239 ·
Re: R1CBU firmware 0.26.0 #development #firmware #r1cbu #R1CBU-Firmware
That's how I do it.
By Michael Pizzirusso · #6238 ·
3D printed MIC
Hi, As an experiment,?I made a printed circuit board for a simplified (PTT-only) microphone and also a 3D-printed case for it. I built a few and they work although I have to turn the mic gain up a
By Scott Baker · #6237 ·
Re: R1CBU firmware 0.26.0 #development #firmware #r1cbu #R1CBU-Firmware
What about setting time from GPS?
By ae5jo.john · #6236 ·
Re: X6100 looses RX after trasmiting
I'm not sure if it caused the problem, but people who make those broadcast filters generally say NOT to use the internal tuner of the radio when using the filter. Using an external tuner between the
By M. K. · #6235 ·
Re: X6100 looses RX after trasmiting
Guys. To make my story short with the Reception problems shown on my previous video... Since I bought my radio from eBay, no support from Radioddity but they were nice and tried to help, but at the
By Roberto - YS1RS · #6234 ·
Re: Xiegu X6100 hardware support - Spare components
Guys. To make my story short with the Xiegu support. Since I bought my radio from eBay, no support from Radioddity but they were nice and tried to help but at the end only got a link to main
By Roberto - YS1RS · #6233 ·
.26 FW freq change
I noticed, compared to factory firmware, that band up/ down buttons don't work as fast. Any ideas?
By K8SAS · #6232 ·
Re: R1CBU firmware 0.26.0 #development #firmware #r1cbu #R1CBU-Firmware
BTW, for outdoor time sync you can setup a WiFi access point on your phone and use it to sync the time.
By Georgy Dyuldin · #6231 ·
Re: Waterfall / Spectrum Display
I guess it's by design. Spectrum top border is at the top of the screen, not below S-meter. Also top panes is semi-transparent. Such design allows to use more height for spectrum (strong signals still
By Georgy Dyuldin · #6230 ·
Waterfall / Spectrum Display
It would be nice to be able to change the proportions (vertical spread) of the waterfall and spectrum displays. For example to increase the vertical size of the spectrum and reduce the waterfall. The
By Randy Reynard · #6229 ·
Re: R1CBU firmware 0.26.0 #development #firmware #r1cbu #R1CBU-Firmware
Well, I was a bit lazy). I'll think how (and where) return it.
By Georgy Dyuldin · #6228 ·
Re: R1CBU firmware 0.26.0 #development #firmware #r1cbu #R1CBU-Firmware
Any chance to get this feature back somehow? It has its use cases. "Time sync button on FT8 app was removed. Now time might be synchronized with WiFi." 73 de Gregor, S53RA
By gregorpozar@... · #6227 ·
Re: Any hope of getting PL tones in the firmwares
I'm not sure, seems it applies to ssb/am/FM. Need to check ср, 30 окт. 2024 г., 22:09 Stephen via groups.io <stephen= [email protected]>:
By Georgy Dyuldin · #6226 ·
Re: Any hope of getting PL tones in the firmwares
Don't 6m repeaters use FM modulation? Sounds like that filtering is specific to ssb. -- Stephen AC2GW
By Stephen · #6225 ·
Re: Any hope of getting PL tones in the firmwares
Well, x6100 in ssb mode is mixing signals from mic and from usb/internal soundcard. But it applies a 300-3000 Hz bandpass filter before modulating RF. This logic is burned within BASE firmware. It can
By Georgy Dyuldin · #6224 ·
Re: Any hope of getting PL tones in the firmwares
Is it possible to have an external tone generator, like a piece of hardware that sits between the mic and radio? ?Or even an app that uses cat control and audio io, letting you speak into the app, it
By Stephen · #6223 ·
Re: Any hope of getting PL tones in the firmwares
Not possible is my understanding.
By Michael Pizzirusso · #6222 ·